PCM Hammer P01 and P59 flash tool v015
Re: PCM Hammer - new ls1 flash tool
I'm not counting anything out except my memory and with that I guess I'm more confused then I thought!
I thought y'all just got the AMD chipped units working, after the release of 005.
As of This post by NSFW
I thought y'all just got the AMD chipped units working, after the release of 005.
As of This post by NSFW
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer - new ls1 flash tool
Yeah we can read them without anything chip specific and the next release should support writing amd chips.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer - new ls1 flash tool
Yeah, we're still missing write support. The code is now written, but there's something wrong with it and I need to figure out what... Because I think I'm going to need BDM to fix the P59 I was working with today.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
- flyn-brian
- Posts: 10
- Joined: Sun Feb 10, 2019 2:09 pm
- cars: No cars in shed. My cars sit outside. But if you must Know my daily driver is an 05 Avalanche
Re: PCM Hammer - new ls1 flash tool
Well I hoped I could get it to work without a screen shot. But for the life of me I couldn't get the file to paste into notepad. Now that I think about it I think it was my virus software (Comodo). Never the less I swapped computers and put PCM Hammer on a completely different computer. Long story short it still didn't work. I appreciate any help given.
- Attachments
-
- PCM Hammer fault out.txt
- (1.79 KiB) Downloaded 217 times
-
- PCM Hammer debug log.txt
- (11.96 KiB) Downloaded 207 times
I code therefore I am.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer - new ls1 flash tool
You need to click in the debug window and hit ctrl + a to select all (or drag for several pages to select all) then paste that. What you've got in the debug log is right but it stops half way through the kernel upload. At that point things are still looking healthy, though.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- flyn-brian
- Posts: 10
- Joined: Sun Feb 10, 2019 2:09 pm
- cars: No cars in shed. My cars sit outside. But if you must Know my daily driver is an 05 Avalanche
Re: PCM Hammer - new ls1 flash tool
Success at last. I flashed the firmware to 4.01 on the OBDLink sx and as I write this I am getting a dump from a PCM. I'm on cloud 9 right now. No more paying for credits.
I code therefore I am.
Re: PCM Hammer - new ls1 flash tool
There is also the Right Click context menu that provides:
Select All
Copy
Paste
And more ...
Select All
Copy
Paste
And more ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
- flyn-brian
- Posts: 10
- Joined: Sun Feb 10, 2019 2:09 pm
- cars: No cars in shed. My cars sit outside. But if you must Know my daily driver is an 05 Avalanche
Re: PCM Hammer - new ls1 flash tool
And here it is my first actual read with PCM Hammer. A PCM with quite a few DIC's not reported and ignored by the pcm. It is a clone of my 05 Avalanche ffv vin code Z that was heavily edited in Hp Tuners. Basically a speed density tune with a bunch of idiot lights shut off .
- Attachments
-
- Yukon AV.bin
- (512 KiB) Downloaded 219 times
I code therefore I am.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer - new ls1 flash tool
Watch out for the filesize. It looks like we dont have OSID 1272058 listed as a 1mbyte tune yet, so the second half of that file is missing (its only 512kb).
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer - new ls1 flash tool
Shouldn't the chip determine the file size ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!