Flex fuel for an Australian Commodore

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
Post Reply
User avatar
antus
Site Admin
Posts: 8250
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:
Contact antus

Re: Flex fuel for an Australian Commodore

Post by antus »

@yortt - did you go to fuel/flex fuel and enable the sensor? (hpt)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
Yortt
Posts: 131
Joined: Mon Apr 13, 2009 10:11 am

Re: Flex fuel for an Australian Commodore

Post by Yortt »

yes it was enabled in the file I bench tested which was an upgrade custom operating system I will now test the standard operating system.
Top
Yortt
Posts: 131
Joined: Mon Apr 13, 2009 10:11 am

Re: Flex fuel for an Australian Commodore

Post by Yortt »

I received a flex tune from a forum member ShorTune (thank you) loaded it into the PCM, the HP Tuners scanner now identifies flex fuel and reads the % ethanol correctly.

Thanks for all those that took the time to respond.
Top
Dylan
Posts: 3356
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Flex fuel for an Australian Commodore

Post by Dylan »

Nice, can't wait to see what we can do with this file
Top
Yortt
Posts: 131
Joined: Mon Apr 13, 2009 10:11 am

Re: Flex fuel for an Australian Commodore

Post by Yortt »

Found this tonight by accident it confirms all my bench testing over the past few days https://www.youtube.com/watch?v=e7A1hhx7f0A
Top
Post Reply

Return to “GM LS1 512Kbyte and 1Mbyte and newer”