Electronic to cable throttle body VZ

[hsv08]

qeustion, I have a guy who is using a P59 in a jetboat application. However he wants to go to a cable throttle body setup.

Now his Ecu is one of the hardware numbers that have the IAC drivers on it going by the hardware number.
I can manually remove the electronic throttle body values and set the tables to that of a P01 bin
However I’m not sure that by removing the electronic throttle body portion of the tune is going to help much as the OSid won’t have the provision for IAC

qeustion is, I’m assuming the 512kb bin won’t run on P59? And if not is there a bin file somebody would have that is a cable driven P59 tune in either a .bin or Hpt file?

[Dylan]

There's an file thats commonly used from the Holden Monaro. 1mb PCM with cable throttle factory fitted.an an LS1.

[hsv08]

There's an file thats commonly used from the Holden Monaro. 1mb PCM with cable throttle factory fitted.an an LS1.

I know the Pontiac GTO runs a cable throttle on a P59, however its trying to locate a bin file thats not been pulled with version 3 HPT

[Gampy]

Curiosity has me wondering whats wrong with a HPTv3.x file.

I believe OSID: 12587603 Will do as you require ...

[edit]
Possibly even better ... 2003 Express Van 1 Ton 6.0L 4L80E Drive by Cable OS 12579405

[hsv08]

Curiosity has me wondering whats wrong with a HPTv3.x file.

I believe OSID: 12587603 Will do as you require ...

[edit]
Possibly even better ... 2003 Express Van 1 Ton 6.0L 4L80E Drive by Cable OS 12579405

Thanks, managed to find a 7603 file so i used that.I had a whole lot of issues last time with V3, rolled back and since stuck to what im used to