PCM Hammer Release 014

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
Site Admin
User avatar
Posts: 6537
Joined: Sat Feb 28, 2009 8:34 pm

Re: PCM Hammer Release 014

Postby antus » Fri Jan 29, 2021 7:02 pm

Add the checksum is not a good solution, most interfaces validate and hide that byte, but even 1 like the AVT is a problem. #1 is an option.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 968
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Fri Jan 29, 2021 8:22 pm

Valid point ... That is not the reason I had #1 as #1, but I did have #1 as #1 for a reason ... :)

A PR is up.
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

User avatar
Posts: 968
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Sat Jan 30, 2021 10:44 pm

antus wrote:But I think we need to look at the response in a recovery flash or when MEC > 0, as I think that piece of code is designed for that scenario.

What the flip does MEC stand for ??

Searching doesn't get it answered!

Thanks!
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

Posts: 208
Joined: Wed Dec 06, 2017 1:02 pm

Re: PCM Hammer Release 014

Postby Vampyre » Sun Jan 31, 2021 4:28 am

Man you guys have been busy, ive finally got walls and ceilings again so ive got some forward movement too.

User avatar
Posts: 968
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Sun Jan 31, 2021 8:11 am

Vampyre wrote:ive finally got walls and ceilings again so ive got some forward movement too.
Awesome, good to hear ...
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

User avatar
Posts: 968
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Sun Jan 31, 2021 2:45 pm

MgFoster,

Please try PCM Hammer Release 015 (Preview).

Thank you!
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

Posts: 330
Joined: Sat Mar 21, 2009 2:02 pm

Re: PCM Hammer Release 014

Postby monaro308 » Mon Feb 01, 2021 4:26 pm

Gampy wrote:
antus wrote:But I think we need to look at the response in a recovery flash or when MEC > 0, as I think that piece of code is designed for that scenario.

What the flip does MEC stand for ??

Searching doesn't get it answered!

Thanks!


MEC = Manufacture Enable Counter
Basically production line mode of key cycles

User avatar
Posts: 968
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Tue Feb 02, 2021 12:29 am

Thank you.
Windows 10 is like an off idle flat spot ... It stumbles when it's time to go!

Previous

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 12 guests