PCM Hammer Release 014
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 014
Add the checksum is not a good solution, most interfaces validate and hide that byte, but even 1 like the AVT is a problem. #1 is an option.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer Release 014
Valid point ... That is not the reason I had #1 as #1, but I did have #1 as #1 for a reason ...
A PR is up.
A PR is up.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 014
What the flip does MEC stand for ??antus wrote:But I think we need to look at the response in a recovery flash or when MEC > 0, as I think that piece of code is designed for that scenario.
Searching doesn't get it answered!
Thanks!
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 014
Man you guys have been busy, ive finally got walls and ceilings again so ive got some forward movement too.
Re: PCM Hammer Release 014
Awesome, good to hear ...Vampyre wrote:ive finally got walls and ceilings again so ive got some forward movement too.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 014
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 340
- Joined: Sat Mar 21, 2009 2:02 pm
- cars: VT S1 LS1 C/dore track car
HJ GTS Monaro Coupe
CV8 V2 S3
VE SSV
Re: PCM Hammer Release 014
MEC = Manufacture Enable CounterGampy wrote:What the flip does MEC stand for ??antus wrote:But I think we need to look at the response in a recovery flash or when MEC > 0, as I think that piece of code is designed for that scenario.
Searching doesn't get it answered!
Thanks!
Basically production line mode of key cycles
Re: PCM Hammer Release 014
Thank you.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!