PCM Hammer Release 014

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
Posts: 3
Joined: Sun Aug 16, 2020 3:06 pm

Re: PCM Hammer Release 014

Postby crazy4chevs » Sun Aug 16, 2020 3:49 pm

it says its too big.. how do you share the log file?
Last edited by crazy4chevs on Sun Aug 16, 2020 11:09 pm, edited 1 time in total.

User avatar
Posts: 771
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Sun Aug 16, 2020 5:57 pm

To post a Debug log as a file attachment,

In PcmHammer,
Select the Debug Log tab page to make the Debug log active.
Right-Click: Over log text (Hover mouse over Text of the log)
Select: Select All
Right-Click: Over selected text
Select: Copy

In Windows,
Open: Notepad
Select: Edit
Select: Paste
Select: File
Select: Save As...
. Enter a filename, take note of it and it's location.
Select: Save

On PcmHacking website.
While in the Post Editor (Not Quick Reply), look to the lower left,
Select: Upload Attachment
Select: Browse
. Browse to the Log file you saved and select it.
Select: Open

Select: Add The File

That's all folks ...
Temporary is a permanent problem!

Posts: 3
Joined: Sun Aug 16, 2020 3:06 pm

Re: PCM Hammer Release 014

Postby crazy4chevs » Mon Aug 17, 2020 12:00 am

Thanks GAMPY! Ok lets try this again.

4896 changed to 12212156

this was my first flash so hope everything looks good. 5.3 4l60e vats delete, egr delete, gears to 5.13 couldn't figure out the rear O2 delete yet.

first bin. then log. done in 4minutes 20 seconds with a maxiflash elite j2534
Attachments
4896 after new Os log file.txt
(1.68 MiB) Downloaded 47 times
4896 pcm after new Os reflash vats delete-egr delete-5.13 gears.bin
(512 KiB) Downloaded 46 times

User avatar
Posts: 771
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Mon Aug 17, 2020 5:13 pm

I very much question it's a chatter issue, wouldn't chatter affect writes (uploads) as well??

crazy4chevs,
Thank you for the bin and logs.
If you have the .bin of the original OS in unmodified form, you could post that as well if you would like.
Temporary is a permanent problem!

User avatar
Posts: 36
Joined: Fri Feb 28, 2014 7:38 am

Re: PCM Hammer Release 014

Postby vwnut8392 » Tue Aug 25, 2020 5:46 am

does PCM hammer support the boot mode function for reading and flashing via the grounding the one pad on the bottom side of the ECU?

User avatar
Posts: 437
Joined: Fri Feb 02, 2018 3:13 pm

Re: PCM Hammer Release 014

Postby NSFW » Sun Aug 30, 2020 9:11 am

vwnut8392 wrote:does PCM hammer support the boot mode function for reading and flashing via the grounding the one pad on the bottom side of the ECU?


Yes, I've done that a couple times myself.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!

Posts: 3
Joined: Tue Nov 12, 2019 8:41 am

Re: PCM Hammer Release 014

Postby engineman » Thu Sep 10, 2020 8:27 am

I have had all I can do is good success with ver06 - ver012. Now with ver014 all I can do is select device my AVT-852. When clicking ok it goes back to no device selected. This is as far as it will go. Please anyone know what to do to make ver014 work?

User avatar
Posts: 771
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 014

Postby Gampy » Thu Sep 10, 2020 9:01 am

engineman wrote:I have had all I can do is good success with ver06 - ver012. Now with ver014 all I can do is select device my AVT-852. When clicking ok it goes back to no device selected. This is as far as it will go. Please anyone know what to do to make ver014 work?

Ensure the user has Write Permissions to the PcmHammer folder.
Temporary is a permanent problem!

Posts: 5
Joined: Fri Sep 11, 2020 11:39 pm

Re: PCM Hammer Release 014

Postby GeoNV » Fri Sep 11, 2020 11:43 pm

Hey, just joined the forum after lurking for a while. here's my stock truck bin file and the log. Read it while still in the truck- I haven't yet built a bench harness as I'm not yet ready to write anything back. Software worked flawlessly.
Attachments
read log.txt
(39.3 KiB) Downloaded 36 times
Stock_2004_GMC_Sierra_1500_4x4_Lm7_4l60e_truck.bin
(1 MiB) Downloaded 34 times

Posts: 160
Joined: Thu Feb 13, 2020 11:32 pm

Re: PCM Hammer Release 014

Postby ironduke » Sat Sep 12, 2020 1:40 am

Is it saying somewhere not to do it in vehicle?? I have been writing in vehicle, so far calibrations only with a GM mdi and it's been perfect every time.. Just did a SSR this week..

PreviousNext

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 2 guests