Gm 4.3 P59, possible?

roughneck427 · Post by **roughneck427** » Wed Oct 07, 2020 3:04 pm

If you swap to the 7603 OS you will need to change the TAC module and pedal. Do you just need a file to run your ride or are you set on tuning it?

bubba2533 · Post by **bubba2533** » Thu Oct 08, 2020 12:19 am

roughneck427 wrote:If you swap to the 7603 OS you will need to change the TAC module and pedal. Do you just need a file to run your ride or are you set on tuning it?

4.3l V6 never came DBW with the P59 PCM.

roughneck427 · Post by **roughneck427** » Thu Oct 08, 2020 12:55 am

bubba2533 wrote:
roughneck427 wrote:If you swap to the 7603 OS you will need to change the TAC module and pedal. Do you just need a file to run your ride or are you set on tuning it?
4.3l V6 never came DBW with the P59 PCM.

Doh yes you are correct

Aedakin · Post by **Aedakin** » Thu Oct 08, 2020 11:14 am

Right now, i dont really care if its tuned. that can come later. but i am so damn close to the finish like and it just laughing at as i'm stuck in VATS mud. Does that 03 have vats on it? hell, if there's a truck out there that just had the VATS disabled, even if running stock tune. could i clone it? I just need to damn vats gone so i can at least start her up.

Aedakin · Post by **Aedakin** » Thu Oct 08, 2020 11:16 am

Hell, I'm about to get into coding and write the damn XDF myself. I found a plug n play stand alone for $127. that isn't to terrible, so if i burn my PCM i have a back up plan

Aedakin · Post by **Aedakin** » Thu Oct 08, 2020 11:22 am

But for a quick catch up of what i have so far. The OBDLink LX, LS Droid pulled my data, Hell, I'm even trying to get software to link up through that from my laptop. Something that can pull the data, mod it, flash it back. but no such luck yet. if you have any suggestions in that area, it would be great. I have a few Windows laptops and a Linux. so could do either.

thank you for your time

you know... I've always wanted to get into programming, just never had that push I've needed. maybe this is it. even if it's not for me. I would love help out this community. I have plenty of time and love to help.

bubba2533 · Post by **bubba2533** » Thu Oct 08, 2020 12:24 pm

Upload your Bin and I'll take a look into finding out where the VATs is.

Aedakin · Post by **Aedakin** » Thu Oct 08, 2020 12:45 pm

As you can imagine, the truck's blue.

Post by **antus** » Thu Oct 08, 2020 7:41 pm

I have disabled vats in this bin, you can do a calibration only flash as the OS isnt changed.

Vats is 00 to 01 at 1FB59 and the checksum update to suit is D7AA to D7A9 at 1FA91

Sorry to steal your thunder bubba2533, I was just waiting for a bin to do that as well.

Aedakin · Post by **Aedakin** » Fri Oct 09, 2020 6:15 am

AWESOME!!! I'm headed outside in a few minutes to give her a try.

Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?

Re: Gm 4.3 P59, possible?