PCM Hammer Debug log

They go by many names, P01, P59, VPW, '0411 etc . Circa 1999 to 2006. All VPW OBD2 PCMs.
User avatar
Posts: 437
Joined: Fri Feb 02, 2018 3:13 pm

Re: PCM Hammer Debug log

Postby NSFW » Mon Nov 16, 2020 4:38 pm

I agree the PCM is either not powered, not working, or not connected properly.

The main reason the "Read Properties" button is there on the main window is so you can use it to prove that the PCM is alive and the connection is working. It just sends and receives some very simple messages, so I always click it before I try anything else.
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!

Posts: 5
Joined: Sun Nov 15, 2020 3:22 am

Re: PCM Hammer Debug log

Postby meece0927 » Tue Nov 17, 2020 11:05 am

After checking bench harness
[08:03:37:175] PCM Hammer 014
[08:03:37:175] ElmDevice initialization starting.
[08:03:42:605] TX:
[08:03:42:712] TX: AT Z
[08:03:43:555] ELM327 v1.4b
[08:03:43:555] TX: AT E0
[08:03:43:563] AT E0 OK
[08:03:43:563] TX: AT S0
[08:03:43:571] OK
[08:03:43:571] TX: AT RV
[08:03:43:579] Voltage: 14.6V
[08:03:43:579] TX: AT I
[08:03:43:587] Elm ID: ELM327 v1.4b
[08:03:43:591] Initializing PcmHacking.AllProDeviceImplementation
[08:03:43:591] TX: AT #1
[08:03:43:599] This is not an AllPro device.
[08:03:43:599] Determining whether PcmHacking.ScanToolDeviceImplementation is connected.
[08:03:43:603] TX: ST I
[08:03:43:636] ScanTool device ID: STN1155 v4.7.5
[08:03:43:640] TX: AT ST FF
[08:03:43:640] OK
[08:03:43:640] TX: AT AL
[08:03:43:655] OK
[08:03:43:655] TX: AT SP2
[08:03:43:655] OK
[08:03:43:655] TX: AT DP
[08:03:43:671] SAE J1850 VPW
[08:03:43:671] TX: AT AR
[08:03:43:671] OK
[08:03:43:671] TX: AT AT0
[08:03:43:687] OK
[08:03:43:687] TX: AT SR F0
[08:03:43:703] OK
[08:03:43:703] TX: AT H1
[08:03:43:781] OK
[08:03:43:781] TX: AT ST 20
[08:03:43:796] OK
[08:03:53:068] Setting timeout for ReadProperty, 25 ms.
[08:03:53:068] TX: AT ST 06
[08:03:53:116] OK
[08:03:53:116] TX: STPX H:6C10F0, R:1, D:3C01
[08:03:54:272] Timeout during receive.
[08:03:54:272] VIN query failed: Timeout
[08:03:54:272] TX: STPX H:6C10F0, R:1, D:20
[08:04:20:420] C:\Users\akhta\Desktop\TunerPro LQ4\Bins to Use\firstwarmup.bin
[08:04:20:444] Validating 512k file.
[08:04:20:449] Start End Stored Needed Verdict Segment Name
[08:04:20:449] 00000 7FFFD 7F53 7F53 Good Operating system
[08:04:20:449] 08002 13FFF 0F51 0F51 Good Engine calibration
[08:04:20:464] 14002 16DFF B770 B770 Good Engine diagnostics.
[08:04:20:464] 16E02 1BDFF 0853 0853 Good Transmission calibration
[08:04:20:480] 1BE02 1C7FF EDDD EDDD Good Transmission diagnostics
[08:04:20:495] 1C802 1E51F 1D08 1D08 Good Fuel system
[08:04:20:495] 1E522 1EE9F 4CB1 4CB1 Good System
[08:04:20:511] 1EEA2 1EF9F 2257 2257 Good Speedometer
[08:04:20:527] Requesting operating system ID...
[08:04:20:542] TX: STPX H:6C10F0, R:1, D:3C0A
[08:04:21:716] Timeout during receive.
[08:04:21:716] Sending 'test device present' notification.
[08:04:21:716] Setting timeout for Minimum, 0 ms.
[08:04:21:716] TX: AT ST 01
[08:04:21:763] OK
[08:04:21:763] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:21:778] Setting timeout for ReadProperty, 25 ms.
[08:04:21:778] TX: AT ST 06
[08:04:21:778] OK
[08:04:22:809] Timeout during receive.
[08:04:22:809] Sending 'test device present' notification.
[08:04:22:809] Setting timeout for Minimum, 0 ms.
[08:04:22:809] TX: AT ST 01
[08:04:22:981] OK
[08:04:22:981] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:22:997] Setting timeout for ReadProperty, 25 ms.
[08:04:22:997] TX: AT ST 06
[08:04:23:013] OK
[08:04:24:044] Timeout during receive.
[08:04:24:044] Sending 'test device present' notification.
[08:04:24:044] Setting timeout for Minimum, 0 ms.
[08:04:24:044] TX: AT ST 01
[08:04:24:215] OK
[08:04:24:215] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:24:231] Setting timeout for ReadProperty, 25 ms.
[08:04:24:231] TX: AT ST 06
[08:04:24:231] OK
[08:04:25:278] Timeout during receive.
[08:04:25:278] Sending 'test device present' notification.
[08:04:25:278] Setting timeout for Minimum, 0 ms.
[08:04:25:278] TX: AT ST 01
[08:04:25:449] OK
[08:04:25:449] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:25:465] Setting timeout for ReadProperty, 25 ms.
[08:04:25:465] TX: AT ST 06
[08:04:25:481] OK
[08:04:26:511] Timeout during receive.
[08:04:26:511] Receive timed out. Attempt #5, Timeout #5.
[08:04:26:511] TX: STPX H:6C10F0, R:1, D:3C0A
[08:04:27:699] Timeout during receive.
[08:04:27:699] Sending 'test device present' notification.
[08:04:27:699] Setting timeout for Minimum, 0 ms.
[08:04:27:699] TX: AT ST 01
[08:04:27:730] OK
[08:04:27:745] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:27:745] Setting timeout for ReadProperty, 25 ms.
[08:04:27:761] TX: AT ST 06
[08:04:27:761] OK
[08:04:28:792] Timeout during receive.
[08:04:28:792] Sending 'test device present' notification.
[08:04:28:792] Setting timeout for Minimum, 0 ms.
[08:04:28:792] TX: AT ST 01
[08:04:28:855] OK
[08:04:28:855] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:28:948] Setting timeout for ReadProperty, 25 ms.
[08:04:28:948] TX: AT ST 06
[08:04:29:026] OK
[08:04:30:057] Timeout during receive.
[08:04:30:057] Sending 'test device present' notification.
[08:04:30:057] Setting timeout for Minimum, 0 ms.
[08:04:30:057] TX: AT ST 01
[08:04:30:151] OK
[08:04:30:151] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:30:167] Setting timeout for ReadProperty, 25 ms.
[08:04:30:167] TX: AT ST 06
[08:04:30:182] OK
[08:04:31:213] Timeout during receive.
[08:04:31:213] Sending 'test device present' notification.
[08:04:31:213] Setting timeout for Minimum, 0 ms.
[08:04:31:213] TX: AT ST 01
[08:04:31:385] OK
[08:04:31:385] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:31:401] Setting timeout for ReadProperty, 25 ms.
[08:04:31:401] TX: AT ST 06
[08:04:31:416] OK
[08:04:32:447] Timeout during receive.
[08:04:32:447] Receive timed out. Attempt #5, Timeout #5.
[08:04:32:447] Operating system request failed, checking for a live kernel...
[08:04:32:478] TX: STPX H:6C10F0, R:1, D:3D00
[08:04:33:634] Timeout during receive.
[08:04:33:744] TX: STPX H:6C10F0, R:1, D:3D00
[08:04:34:806] Timeout during receive.
[08:04:34:915] TX: STPX H:6C10F0, R:1, D:3D00
[08:04:35:993] Timeout during receive.
[08:04:36:102] TX: STPX H:6C10F0, R:1, D:3D00
[08:04:37:227] Timeout during receive.
[08:04:37:336] TX: STPX H:6C10F0, R:1, D:3D00
[08:04:38:461] Timeout during receive.
[08:04:38:570] Checking for recovery mode...
[08:04:38:601] TX: STPX H:6C10F0, R:1, D:62
[08:04:39:695] Timeout during receive.
[08:04:39:695] TX: STPX H:6C10F0, R:1, D:62
[08:04:40:796] Timeout during receive.
[08:04:40:796] TX: STPX H:6C10F0, R:1, D:62
[08:04:41:873] Timeout during receive.
[08:04:41:888] TX: STPX H:6C10F0, R:1, D:62
[08:04:42:982] Timeout during receive.
[08:04:42:997] TX: STPX H:6C10F0, R:1, D:62
[08:04:44:091] Timeout during receive.
[08:04:44:106] TX: STPX H:6C10F0, R:1, D:62
[08:04:45:184] Timeout during receive.
[08:04:45:184] TX: STPX H:6C10F0, R:1, D:62
[08:04:46:262] Timeout during receive.
[08:04:46:262] TX: STPX H:6C10F0, R:1, D:62
[08:04:47:324] Timeout during receive.
[08:04:47:324] TX: STPX H:6C10F0, R:1, D:62
[08:04:48:449] Timeout during receive.
[08:04:48:449] TX: STPX H:6C10F0, R:1, D:62
[08:04:49:527] Timeout during receive.
[08:04:49:527] PCM is not responding to OSID, kernel version, or recovery mode checks.
[08:04:49:558] Unlock may not work, but we'll try...
[08:04:49:589] Suppressing VPW chatter.
[08:04:49:589] TX: STPX H:6CFEF0, R:1, D:2800
[08:04:49:636] Sending 'test device present' notification.
[08:04:49:636] Setting timeout for Minimum, 0 ms.
[08:04:49:636] TX: AT ST 01
[08:04:49:651] OK
[08:04:49:651] TX: STPX H:8CFEF0, R:0, D:3F
[08:04:49:667] Setting timeout for ReadProperty, 25 ms.
[08:04:49:667] TX: AT ST 06
[08:04:49:682] OK
[08:04:50:714] Timeout during receive.
[08:04:50:823] Sending seed request.
[08:04:50:823] TX: STPX H:6C10F0, R:1, D:2701
[08:04:51:963] Timeout during receive.
[08:04:51:963] No response to seed request.
[08:04:51:963] Unlock was not successful.

User avatar
Posts: 774
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Debug log

Postby Gampy » Tue Nov 17, 2020 12:18 pm

The PCM is still not responding ...

Was there a partial write failure on this PCM prior to the log in the first post ??
Temporary is a permanent problem!

Previous

Return to GM LS1 512Kbyte and 1Mbyte

Who is online

Users browsing this forum: No registered users and 1 guest