Switch in Hex for Inverted Cam Sensor

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: Switch in Hex for Inverted Cam Sensor

Post by kur4o »

There is some calibration for l18 engine 8.1 l bbc, but I guess it differs with the older stuff. It already have COP but I am not sure about the firing order.
RADustin
Posts: 162
Joined: Fri Oct 17, 2014 9:44 am

Re: Switch in Hex for Inverted Cam Sensor

Post by RADustin »

kur4o wrote:There is some calibration for l18 engine 8.1 l bbc, but I guess it differs with the older stuff. It already have COP but I am not sure about the firing order.
actually going to try the 8.1 cam sensor and compare to the weird one I have....maybe it'll swap 1 for 1 and not be inverted.
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: Switch in Hex for Inverted Cam Sensor

Post by kur4o »

The only way to get the signal inverted is to phase the camshaft 180* off or the sensor is mounted on oposite side again 180* off.

Either way I think it can be tuned out. As long as you know the TDC of cylinders for signal rising and falling. We just need to match cylinder ids{A-H) vs actual cylinder number.
Cincinnatus
Posts: 305
Joined: Fri Jul 30, 2021 5:49 pm
cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe

Re: Switch in Hex for Inverted Cam Sensor

Post by Cincinnatus »

What ever happened with this?
Post Reply