Vcx nano error 126 using PCM hammer SOLVED!
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Vcx nano error 126 using PCM hammer SOLVED!
[Mod Edit]
The VXDiag VCX Nano fails when PCMHammer and or PCMLogger is installed from the Microsoft App Store.
Please download the zip file from https://github.com/LegacyNsfw/PcmHacks/releases and unzip to a suitable location.
We apologize for the inconvenience.
So I have a vcx nano with windows 10. I have used it with gds2, tech2win, sps, and forscan without any problems. I installed PCM hammer and when I choose vcxdiag I get error 126 can't load vcx.dll. I'm not a programmer but competent getting hardware functional. Any ideas or suggestions greatly appreciated. I also have hptuners, elm327, and am considering the vci j2534 for Toyota if anyone has experience please share. Also wondering if the vci is compatible with PCM hammer if anyone has used it? Thanks, Cincinnatus
The VXDiag VCX Nano fails when PCMHammer and or PCMLogger is installed from the Microsoft App Store.
Please download the zip file from https://github.com/LegacyNsfw/PcmHacks/releases and unzip to a suitable location.
We apologize for the inconvenience.
So I have a vcx nano with windows 10. I have used it with gds2, tech2win, sps, and forscan without any problems. I installed PCM hammer and when I choose vcxdiag I get error 126 can't load vcx.dll. I'm not a programmer but competent getting hardware functional. Any ideas or suggestions greatly appreciated. I also have hptuners, elm327, and am considering the vci j2534 for Toyota if anyone has experience please share. Also wondering if the vci is compatible with PCM hammer if anyone has used it? Thanks, Cincinnatus
Last edited by Cincinnatus on Mon Aug 09, 2021 4:10 pm, edited 2 times in total.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vcx nano error 126 using PCM hammer
Toyota doesnt have vpw so its unlikely to have the protocol you need. Can you post up a debug log from the start to where the error pops up from pcmhammer?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Vcx nano error 126 using PCM hammer
That's odd, What VCX Nano ??
The GM/Opel VCX Nano is used by many without issue ...
The GM/Opel VCX Nano is used by many without issue ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: Vcx nano error 126 using PCM hammer
It's USB model. Have owned for couple years. Not sure how to run debug log. Will Google it and try to submit one. The vci for Toyota claims to support multiple protocols including j1850 vpw which I believe is gm protocol. I programmed in the 80s in basic and learned Fortran and Cobol in college. I quit computers until windows 98 came out. I am interested in helping with the software and was going to dl visual studio. What language is hammer written in? Thanks everyone!
Re: Vcx nano error 126 using PCM hammer
Ok, so it's a USB model ... What one ??Cincinnatus wrote:It's USB model. Have owned for couple years. Not sure how to run debug log. Will Google it and try to submit one. The vci for Toyota claims to support multiple protocols including j1850 vpw which I believe is gm protocol. I programmed in the 80s in basic and learned Fortran and Cobol in college. I quit computers until windows 98 came out. I am interested in helping with the software and was going to dl visual studio. What language is hammer written in? Thanks everyone!
Post an image of it.
You attach an image the same way as the log below.
To save a debug log in PCM Hammer, select File, Save, Debug Log ...
It's going to open a File Save As Dialog and allow you to save the file ...
To Add an Attachment here, while in the Editor (not quick reply), look to the lower left, you will see "Upload Attachment" ... follow the buttons at that point.
Unfortunately it's a dishonest world, many tools say they support protocols they do not actually support!
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: Vcx nano error 126 using PCM hammer
Vcx serial number starts n52gm***** it's for gm. On PCM hammer without opening a file, just selecting vcxdiag as device causes the error. Then every time I open hammer it immediately says the error before hammer opens.
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: Vcx nano error 126 using PCM hammer
Here is when I try to open hammer. Sorry for pic quality as I use phone instead of computer most of the time.
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: Vcx nano error 126 using PCM hammer
Took this too. Btw I run my PC without internet most of the time if that makes a difference.
Re: Vcx nano error 126 using PCM hammer
The error, IIRC it is a missing Microsoft vc-redist package, IIRC it's vc_redist-2015.
Gosh I sure do despise ET apps Phoning Home ... i.e. the Unhandled Exception because it's not connected to the internet.
Don't get me wrong, it still should not throw an Exception, it should handle it appropriately, I'll look into it, it's not causing your problem.
PCM Hammer remembers the device used and saves it in the %localappdata%\PcmHacking directory.
It is safe to delete it, it will recreate it the next time PCM Hammer is launched.
-Enjoy
Gosh I sure do despise ET apps Phoning Home ... i.e. the Unhandled Exception because it's not connected to the internet.
Don't get me wrong, it still should not throw an Exception, it should handle it appropriately, I'll look into it, it's not causing your problem.
PCM Hammer remembers the device used and saves it in the %localappdata%\PcmHacking directory.
It is safe to delete it, it will recreate it the next time PCM Hammer is launched.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 305
- Joined: Fri Jul 30, 2021 5:49 pm
- cars: 97 Corvette
92 Camaro
2005 Silverado
2001 Savana 2500
1998 c3500hd
1998 tahoe
Re: Vcx nano error 126 using PCM hammer
So hammer is looking in windows subfolders for vcx.dll and it wasn't placed there when I installed software or drivers for the nano? Since forscan works with the nano, isn't it just an issue of hammer finding the location of driver data for the nano? I searched for vcx.dll and it is in c:/windows but hammer isn't finding it. Curious why others with nanos aren't having the same problem.