PCM Hammer Release 19
Re: PCM Hammer Release 19
I think the attached file is the one I used to update my AllPro. However that was a couple years ago, so I'm not 100% certain.
I also don't remember what tool I used to flash it.
I also don't remember what tool I used to flash it.
- Attachments
-
- allpro-1.21.hex
- (105.55 KiB) Downloaded 109 times
Please don't PM me with technical questions - start a thread instead, and send me a link to it. That way I can answer in public, and help other people who have the same question. Thanks!
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 19
Yep, thats the right version. You use flashmagic setup like this. https://www.flashmagictool.com/
- Attachments
-
- allpro-device id.png (22.24 KiB) Viewed 2672 times
-
- allpro-verified.png (27.13 KiB) Viewed 2672 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer Release 19
My Allpro reports v1.22 ...
A quick look at Flashmagic and it appears it reads, so I'll see if I can get v1.22 off mine and post it, maybe one of you hex wizards can identify what was changed.
I did save a version of flashmagic from when I bought my Allpro, I thought I flashed it to v1.22, yet I have no files to flash, I dunno know what I did now, to many life farts since!
A quick look at Flashmagic and it appears it reads, so I'll see if I can get v1.22 off mine and post it, maybe one of you hex wizards can identify what was changed.
I did save a version of flashmagic from when I bought my Allpro, I thought I flashed it to v1.22, yet I have no files to flash, I dunno know what I did now, to many life farts since!
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 19
Unable to get flashmagic to communicate,
Ideas welcome, does the jumper on the device need to be jumped ??
EDIT: Jumped J3, I can read the signature, all I get on a flash read is F's ... Intel format hex file size winds up being 184,350 bytes of mostly F's.
Sure be nice to have a v1.22 file handy in case ...
I have two zip files from when I purchased my Allpro, and what I believe to be the latest available Github repo.
The repo last commit is,
Sure would be nice to have the final (v1.22) source!
The zip files are,
allpro-hex.zip
-Enjoy
Flashmagic 12.85 build 5813, downloaded at time of Allpro purchase.Ideas welcome, does the jumper on the device need to be jumped ??
EDIT: Jumped J3, I can read the signature, all I get on a flash read is F's ... Intel format hex file size winds up being 184,350 bytes of mostly F's.
Sure be nice to have a v1.22 file handy in case ...
I have two zip files from when I purchased my Allpro, and what I believe to be the latest available Github repo.
The repo last commit is,
and is marked as v1.21.a8165c1 - 2018-06-01, ObdDiag-Net : Timer implementation changes
Sure would be nice to have the final (v1.22) source!
The zip files are,
allpro-hex.zip
allpro-mfgr-data.zipallpro-1.21.hex : 108,080 : 06/01/2018 @15:28
My allpro-1.21.hex is byte wise identical to NSFW's.obdadpt15.cmp : 224,079 : 4/16/2018 @11:35
obdadpt15.stc : 5,632 : 4/16/2018 @11:35
obdadpt15.sol : 84,607 : 4/16/2018 @11:35
obdadpt15.drd : 1,015 : 4/16/2018 @11:35
obdadpt15.sts : 1,617 : 4/16/2018 @11:35
obdadpt15.plc : 46,417 : 4/16/2018 @11:35
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer Release 19
Did you put it in bootloader mode?
Yes 15 is not the one to use, thats just screen shots I saved of the configuration of flash magic for a reference when I first flashed mine. I have 121 laying around, so that must work, 122 probably also works.
Yes 15 is not the one to use, thats just screen shots I saved of the configuration of flash magic for a reference when I first flashed mine. I have 121 laying around, so that must work, 122 probably also works.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: PCM Hammer Release 19
No luck, Signature id's it correctly, no valid reads.
I dunno know, I concede defeat!
I dunno know, I concede defeat!
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 19
Wooooow cool. I'll try to update mine.
Mine Allpro is too old and it looks like usb elm327. Theri is no jumpers in it. I'll try to use Flashmagic. But... there is pic18f2550. I can try to flash it via Tl866ll plus. Just desolder and drop to it.
BTW
I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any
Mine Allpro is too old and it looks like usb elm327. Theri is no jumpers in it. I'll try to use Flashmagic. But... there is pic18f2550. I can try to flash it via Tl866ll plus. Just desolder and drop to it.
BTW
I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any
Re: PCM Hammer Release 19
Not sure I'd try that ... It sounds like your Allpro is different, mine for example uses the LPC1517.
Look at the very very bottom of this page: Allpro USB for what mine looks like.
I'm curious and would like to see an image of your Allpro if you will ...
Look at the very very bottom of this page: Allpro USB for what mine looks like.
I'm curious and would like to see an image of your Allpro if you will ...
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Re: PCM Hammer Release 19
Yea, don't try burning the firmware we are talking about on that unit, the outcome won't be rewarding!
Unless the reward is to force yourself into getting a more modern VCI.
Unless the reward is to force yourself into getting a more modern VCI.
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!