PCM Hammer Release 19

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
User avatar
yoheer
Posts: 79
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Post by yoheer »

I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease :)
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: PCM Hammer Release 19

Post by MudDuck514 »

Gampy wrote:Not sure I'd try that ... It sounds like your Allpro is different, mine for example uses the LPC1517.
Look at the very very bottom of this page: Allpro USB for what mine looks like.

I'm curious and would like to see an image of your Allpro if you will ...

Hi all;

Is it possible he has THIS adapter:
"Also, you might consider ELM329 AllPro adapter. It is year 2018 and most likely you need only CAN protocol."
It lists it on the page linked above.

Mike
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: PCM Hammer Release 19

Post by MudDuck514 »

yoheer wrote:I thought that every allpro carrys pic18f .. chip onboard

I'm searching for OS 12579439, 12570845,12578048, 12572573 bin files. MPV preffered. Couldn't find any.
Pleeeease :)

Hi all;

The PIC18f chips are often used in ELM Clones!

Mike
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: PCM Hammer Release 19

Post by antus »

Yeah that looks like the elm329 re-implementation type allpro. No good for pcmhammer, no VPW protocol support.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
yoheer
Posts: 79
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Post by yoheer »

I've checked via hyperterminal. It does support both vpw and pwm. It might be an old unit
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Post by Gampy »

You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
User avatar
yoheer
Posts: 79
Joined: Sun Sep 06, 2020 10:04 pm

Re: PCM Hammer Release 19

Post by yoheer »

Gampy wrote:You call it an ALL PRO, why do you call it an Allpro, did you purchase it from Obddiag.net ??
When I connect it via Hyperterminal and input AT@1 AT@2 AT@3 it says:
OBDDIAG.NET v.5.16 by Alex Sidorenko, PIC18F2550

PWM wiring is OK
VPW wiring is OK
ISO9141/14230 wiring is OK
CAN MCP2515 reply is OK

I think it is the earliest revesion of this device.
Also I have the 5.16 firmware file for it. If you can add this device to PCMHammer it would be good. Because this device is usless for now. It's to obsolete and there is no modern software that supports it.
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Post by Gampy »

It's impossible to determine what command returned what with it all gobbed together.

I doubt there is any interest in adding it unless it's super simple.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: PCM Hammer Release 19

Post by antus »

Yeah it wont support long packets (thats a show stopper) or 4x (which is a nice to have). Agree really old version. I seem to have a firmware binary in my archives tagged as obddiag.net with no source and dated 2009 for the pic cpu, so it was a thing. I think it all started here https://hackaday.com/2007/11/07/inexpen ... interface/
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 19

Post by Gampy »

So, I guess I'm going backwards ... My Allpro no longer reports v1.22!

It doesn't report anything ... :x :thumbdown:

I dun did f'd it up!

Sure did want to get that binary off.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
Locked