How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by Gampy »

You mean something like this: https://pcmhacking.net/forums/viewtopic.php
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by 12ramhemi »

Gampy wrote:You mean something like this: https://pcmhacking.net/forums/viewtopic.php
Thank you.
I was just literally looking at that thread. Lol.

Now to find an xdf to use with it.. that way I can use tuner pro to make all my initial adjustments.
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by Gampy »

This help ya out ...
12212156 - 2002 512k V1.xdf
(588.09 KiB) Downloaded 122 times
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by 12ramhemi »

Yes sir. I had another xdf I tried but it didnt populate everything in tuner pro. Like no vin, no trans and all DTC disabled.

That xdf you just posted gave it a vin , manual trans and everything else is there
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by 12ramhemi »

I tried to save the bin after a few little changes. Tunerpro keeps saying one or more checksums could not be updated
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by antus »

that'll be the operating system segment, and unless your an advanced user patching code that doesnt matter. but post your bin up here if you'd like us to check the checksums that matter are updated. Its a pitty so many XDFs actually do the operating system segment, causes more problems than its worth for normal use. :(

there will be a checksum plugin that will make the OS segment checksum work properly, but you need to know which one it is and install it on your system. Otherwise you can update the XDF so that it doesnt include the operating system checksum anymore.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by 12ramhemi »

antus wrote:that'll be the operating system segment, and unless your an advanced user patching code that doesnt matter. but post your bin up here if you'd like us to check the checksums that matter are updated. Its a pitty so many XDFs actually do the operating system segment, causes more problems than its worth for normal use. :(

there will be a checksum plugin that will make the OS segment checksum work properly, but you need to know which one it is and install it on your system. Otherwise you can update the XDF so that it doesnt include the operating system checksum anymore.

Here is bin I wanted Instll and xdf files I was using with it in tunerpro
Attachments
2002_TA_Stick_Base.bin
(512 KiB) Downloaded 84 times
12ramhemi
Posts: 14
Joined: Thu Jan 06, 2022 3:37 am
cars: 95 jeep yj doing ls swap, 2012 ram

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by 12ramhemi »

The 2 xdfs I tried
Attachments
12212156 - 2002 512k V1.xdf
(588.09 KiB) Downloaded 77 times
OS12212156 - 2002 512kB PCM - v4.xdf
(1.2 MiB) Downloaded 87 times
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by Gampy »

How do you find out what plugin the xdf uses ??

All I see is the <pluginmoduleid>9a53f579-d1c9-40c6-8691-7a54fa789d3b</pluginmoduleid>
How does one know what dll ...

Thank you!
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: How to make 01 5.7l vortec 0411 pcm to run 5.7 ls1

Post by antus »

Exactly - and therein lies the problem. But in this case I can tell you that's one of mine. And this is where it gets murkier - since my early release was stolen, the attributions ripped out and it sent to people on ebay from where it then spread around the internet, it could be that one too. And now we have version hell because there are multiple plugins with the same ID and Im not sure what the best thing is to do here. I'll attach my copy of the plugin as it was originally released which will work the same anyway.

Code: Select all

./oseplugin/LS1_checksum_plugin-1.1/TPChecksumPlugin.cpp:#define PLUGIN_GUID     "9A53F577-D1C9-40C6-8691-7A54FA789D3A"
But I think the better path forward would be to take the plugins out of the XDFs, and put them back in only if and when the XDF gets a code patch that it can apply, and so only the XDFs that need it. And in that case it'd probably be better to swap over to Joukoy's https://github.com/joukoy/gm-checksum-plugins which I believe works the same way as mine based on viewtopic.php?f=42&t=3845#p85328 but in that case the GUID is original and the dll is maintained, whereas I dont plan to do any more work on mine, and the stolen ones should be forgotten.

Its a pity tunerpro cant tell you the filename it expects, or something more meaningful than a GUID.
Attachments
antus ls1 checksum plugin 1.1.zip
(4.31 KiB) Downloaded 101 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply