PCM Hammer P12 development

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: PCM Hammer P12 development

Post by antus »

This is the OS segment you need, I dont have a complete file but if you make it line up you should find the flipped bit.
Attachments
12597778.bin
(864 KiB) Downloaded 84 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Sleepy
Posts: 4
Joined: Mon Apr 18, 2022 12:44 pm

Re: PCM Hammer P12 development

Post by Sleepy »

antus wrote:This is the OS segment you need, I dont have a complete file but if you make it line up you should find the flipped bit.
Strange the first 0x18000 Bytes do match then after that my file has what apparently is the speedometer cal.
12597778_Compare.PNG
12597778_Compare.PNG (39.75 KiB) Viewed 2459 times
12597778.PNG
12597778.PNG (24.76 KiB) Viewed 2459 times
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: PCM Hammer P12 development

Post by antus »

can you post yours up?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Sleepy
Posts: 4
Joined: Mon Apr 18, 2022 12:44 pm

Re: PCM Hammer P12 development

Post by Sleepy »

antus wrote:can you post yours up?
Here it is.
12597778_corupt.bin
(1 MiB) Downloaded 80 times
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: PCM Hammer P12 development

Post by antus »

It looks like the OS segment is split, part at the start of the file, part after the calibration segments etc. Apply a 163840 byte offset (decimal) to verify the second part. This aligns the SPS bin with the end of your file and the data then matches from the point you have highlighted to the end. Your bit flip is at 45D9F in your file which is F9 in the corrupt file and its F8 in the factory file.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Sleepy
Posts: 4
Joined: Mon Apr 18, 2022 12:44 pm

Re: PCM Hammer P12 development

Post by Sleepy »

Thank you so much. I have some questions about reversing the OS now, but I will find a better thread.
bill12690
Posts: 5
Joined: Sat Dec 24, 2022 12:58 pm

Re: PCM Hammer P12 development

Post by bill12690 »

I'd like to share the bin from my 04 Ion Redline donor PCM. This was an LSJ/5 speed P12 car. I wish I knew more about the XDF development process, I'd be down to help. I've also cross-posted this in the PCM Hammer 021 release thread as well.

[06:32 22:011] PCM Hammer 021
[06:32:22:013] Friday, December 23 2022 @06:32:22:01
[06:32:22:466] Device Found: OBDX Pro GT
[06:32:22:499] Device Successfully Initialized and Ready
[06:32:24:669] VIN query failed: Timeout
[06:32:26.632] VIN query failed: Timeout
[06:32:29:650] VIN query failed: Timeout
[06:33:01:4211 VIN: 1G8AY12P34Z207779
[06:33:01:459] OS ID: 12597978
[06:33:01:468] Hardware Type: P12
[06:33:01:519] Calibration ID: 0
[06:33:01:6371 Serial Number: 4131KE005
[06:33:01:681] Broad Cast Code: YKHW
[06:33:01:717] MEC: 0
[06:33:15:899] Will save to C:\Users\k_blo\Downloads\Pcm Hammer021\LSJ.bin
[06:33:25:897] Querying operating system of current PCM.
[06:33:25 934] OSID: 12597978
[06:33:26:039] Unlock succeeded.
[06:33:26:055] Attempting switch to VPW 4x
[06:33:26:097] Module Ox10 (engine controller) has agreed to enter high-speed mode
[06:33:28:027] Kernel upload 49% complete.
[06:33:28:826] Kernel upload 100% complete.
[06:33:29:453) Kernel Version: 0103050C
[06:33:29:460] kemel uploaded to PCM succesfully. Requesting data...
[06:33:29:474] Flash chip: AMD AM29BL802C, 1mb
Attachments
LSJ2.bin
(1 MiB) Downloaded 51 times
Last edited by bill12690 on Mon Jan 16, 2023 6:08 pm, edited 1 time in total.
spyder09
Posts: 76
Joined: Thu Apr 21, 2022 3:50 am
cars: saturn ion redline
hhr ss

Re: PCM Hammer P12 development

Post by spyder09 »

bill12690 wrote:I'd like to share the bin from my 04 Ion Redline donor PCM. This was an LSJ/5 speed P12 car. I wish I knew more about the XDF development process, I'd be down to help. I've also cross-posted this in the PCM Hammer 021 release thread as well.

[06:32 22:011] PCM Hammer 021
[06:32:22:013] Friday, December 23 2022 @06:32:22:01
[06:32:22:466] Device Found: OBDX Pro GT
[06:32:22:499] Device Successfully Initialized and Ready
[06:32:24:669] VIN query failed: Timeout
[06:32:26.632] VIN query failed: Timeout
[06:32:29:650] VIN query failed: Timeout
[06:33:01:4211 VIN: 1G8AY12P34Z207779
[06:33:01:459] OS ID: 12597978
[06:33:01:468] Hardware Type: P12
[06:33:01:519] Calibration ID: 0
[06:33:01:6371 Serial Number: 4131KE005
[06:33:01:681] Broad Cast Code: YKHW
[06:33:01:717] MEC: 0
[06:33:15:899] Will save to C:\Users\k_blo\Downloads\Pcm Hammer021\LSJ.bin
[06:33:25:897] Querying operating system of current PCM.
[06:33:25 934] OSID: 12597978
[06:33:26:039] Unlock succeeded.
[06:33:26:055] Attempting switch to VPW 4x
[06:33:26:097] Module Ox10 (engine controller) has agreed to enter high-speed mode
[06:33:28:027] Kernel upload 49% complete.
[06:33:28:826] Kernel upload 100% complete.
[06:33:29:453) Kernel Version: 0103050C
[06:33:29:460] kemel uploaded to PCM succesfully. Requesting data...
[06:33:29:474] Flash chip: AMD AM29BL802C, 1mb

12597978 is an 04 OS, 12610624 is an 07 OS
bill12690
Posts: 5
Joined: Sat Dec 24, 2022 12:58 pm

Re: PCM Hammer P12 development

Post by bill12690 »

spyder09 wrote: 12597978 is an 04 OS, 12610624 is an 07 OS
Sorry, wrong BIN somehow attached. Edited and uploaded the correct BIN. This is from an 04, not an 07. I'm actually not sure at the moment where exactly I even found the 07 BIN.
edit: the 07 bin was another LSJ car, but found on the gearhead-efi forum. I evidently just clicked the wrong one at the original upload.
User avatar
Lowlyfe1
Posts: 32
Joined: Thu Dec 12, 2019 7:43 am
cars: 2002 silverado 5.3, 88 300 zx

Re: PCM Hammer P12 development

Post by Lowlyfe1 »

Here is the file from a twincharged setup Im working on with a friend its from a 2006 ion redline operating system 12598284
Attachments
ve table cleanup ltfts off maf off_exported.bin
(1 MiB) Downloaded 52 times
Post Reply