PCM Hammer Release 021

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: PCM Hammer Release 021

Post by kur4o »

12627885 is 2mb. I got a full file with that OS and it is 2mb. What is the vin from 04 that uses this.
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 021

Post by Gampy »

kur4o wrote:12627885 is 2mb. I got a full file with that OS and it is 2mb. What is the vin from 04 that uses this.
Thank ya sir!

The VIN: 1GTCS146048136101
From the log posted here: https://pcmhacking.net/forums/post looks up as a 2004 GMC Canyon Reg Cab 111.2" WB SLE Z85.
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: PCM Hammer Release 021

Post by kur4o »

Code: Select all

12593533	00009CD0	Software change to reduce the potential for setting P0507 and improve engine speed control.
12589586	00005505	New software to enhance heated oxygen sensor diagnostics.
12589166	0000A7AD	New software for driveability and idle quality improvements
12588651	00002764	Supercession to make latest operating system available for LK5 and L52 engines.
12589312	0000F7E1	New software for driveability and idle quality improvements
12587007	000007C9	Operating system
This comes for OS updates and the stated vin. Someone did change the vin for sure for some reason.
spyder09
Posts: 76
Joined: Thu Apr 21, 2022 3:50 am
cars: saturn ion redline
hhr ss

Re: PCM Hammer Release 021

Post by spyder09 »

kur4o wrote:12627885 is 2mb. I got a full file with that OS and it is 2mb. What is the vin from 04 that uses this.
How did you get a full file with that OS, and I have been able to write a 1mb file to a p12b computer. I have also wrote a p12b file to a p12 pcm, and was able to run a car from it
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: PCM Hammer Release 021

Post by kur4o »

spyder09 wrote: How did you get a full file with that OS, and I have been able to write a 1mb file to a p12b computer. I have also wrote a p12b file to a p12 pcm, and was able to run a car from it
Someone donate some files long time ago, and this one was there.

I can doubt your statement and disagree. Maybe you have used misidentified files.
Looking at the disassembly, if you write 2 mb file on 1mb pcm OS checksum will be incorrect and pcm will soft brick.
1mb file on 2mb pcm is more likely to work.
spyder09
Posts: 76
Joined: Thu Apr 21, 2022 3:50 am
cars: saturn ion redline
hhr ss

Re: PCM Hammer Release 021

Post by spyder09 »

I have not seen a 2mb file so far from any p12 pcms. I have pulled a hanful of p12b OS's both personally and from the HPT tune directory. The file size is the same as the p12 files, which are 1mb.
If you have a 2mb file please attach it and I will take a look/try flashing it to a p12 if I have the other 2 supporting bin files needed. As for flashing p12b OS, I can try flashing that to a p12 tomorrow which I know I have done and tested but will again.
spyder09
Posts: 76
Joined: Thu Apr 21, 2022 3:50 am
cars: saturn ion redline
hhr ss

Re: PCM Hammer Release 021

Post by spyder09 »

Pulled from pcm recently got my hands on, will be reading another p12 OS shortly. PCM hammer was able to pull this bin successfully
Attachments
2007 Saturn Ion Redline 12610624 pcm hammer.bin
(1 MiB) Downloaded 95 times
2007 Saturn Ion Redline P12 12610624.hpt
(344.05 KiB) Downloaded 89 times
spyder09
Posts: 76
Joined: Thu Apr 21, 2022 3:50 am
cars: saturn ion redline
hhr ss

Re: PCM Hammer Release 021

Post by spyder09 »

PCM Hammer logs below. Attached is the HPT and bin from this PCM

[12:25:38:212] PCM Hammer 021.2
[12:25:38:215] Friday, May 20 2022 @12:25:38:21
[12:25:38:712] Device Found: OBDX Pro VT
[12:25:38:740] Device Successfully Initialized and Ready
[12:25:40:191] VIN: ?????????????????
[12:25:40:230] OS ID: 12623279
[12:25:40:237] Hardware Type: P01_P59
[12:25:40:277] Calibration ID: 12623276
[12:25:45:406] Hardware ID query failed: Error
[12:25:45:531] Serial Number: 5287KH07Q
[12:25:45:575] Broad Cast Code: YHTP
[12:25:45:611] MEC: 0


[12:25:38:212] PCM Hammer 021.2
[12:25:38:215] Friday, May 20 2022 @12:25:38:21
[12:25:38:217] Initializing OBDX Pro on COM4
[12:25:38:712] Device Found: OBDX Pro VT
[12:25:38:718] Switched to DVI protocol
[12:25:38:721] XPro: 32 0C 03 4F 42 44 58 20 50 72 6F 20 56 54 76
[12:25:38:723] XPro: 32 03 01 00 66 63
[12:25:38:723] Firmware version: v1.02
[12:25:38:726] XPro: 32 03 00 01 2D 9C
[12:25:38:727] Hardware version: v3.01
[12:25:38:731] XPro: 32 0D 04 06 6C FF 55 49 48 87 48 87 18 53 25 7F
[12:25:38:732] Unique Serial: 066CFF554948874887185325
[12:25:38:734] XPro: 41 02 01 01 BA
[12:25:38:734] OBD Protocol Set to VPW
[12:25:38:736] XPro: 43 03 00 F0 01 C8
[12:25:38:737] Filter set and enabled
[12:25:38:739] XPro: 41 02 02 01 B9
[12:25:38:739] Network enabled
[12:25:38:740] Device Successfully Initialized and Ready
[12:25:40:060] XPro: 20 01 00 DE
[12:25:40:062] TX: 6C 10 F0 3C 01
[12:25:40:122] XPro: 20 01 00 DE
[12:25:40:122] TX: 6C 10 F0 3C 02
[12:25:40:160] XPro: 20 01 00 DE
[12:25:40:161] TX: 6C 10 F0 3C 03
[12:25:40:191] VIN: ?????????????????
[12:25:40:207] XPro: 20 01 00 DE
[12:25:40:207] TX: 6C 10 F0 3C 0A
[12:25:40:230] OS ID: 12623279
[12:25:40:237] Hardware Type: P01_P59
[12:25:40:248] XPro: 20 01 00 DE
[12:25:40:248] TX: 6C 10 F0 3C 08
[12:25:40:277] Calibration ID: 12623276
[12:25:40:288] XPro: 20 01 00 DE
[12:25:40:288] TX: 6C 10 F0 3C 04
[12:25:40:314] Received an unexpected response. Attempt #1, status Truncated.
[12:25:40:814] Timeout.. no data present A
[12:25:40:817] Sending 'test device present' notification.
[12:25:40:823] XPro: 20 01 00 DE
[12:25:40:824] TX: 8C FE F0 3F
[12:25:41:324] Timeout.. no data present A
[12:25:41:324] Sending 'test device present' notification.
[12:25:41:330] XPro: 20 01 00 DE
[12:25:41:331] TX: 8C FE F0 3F
[12:25:41:831] Timeout.. no data present A
[12:25:41:832] Sending 'test device present' notification.
[12:25:41:837] XPro: 20 01 00 DE
[12:25:41:838] TX: 8C FE F0 3F
[12:25:42:338] Timeout.. no data present A
[12:25:42:339] Sending 'test device present' notification.
[12:25:42:345] XPro: 20 01 00 DE
[12:25:42:345] TX: 8C FE F0 3F
[12:25:42:846] Timeout.. no data present A
[12:25:42:846] Receive timed out. Attempt #6, Timeout #5.
[12:25:42:852] XPro: 20 01 00 DE
[12:25:42:853] TX: 6C 10 F0 3C 04
[12:25:42:875] Received an unexpected response. Attempt #1, status Truncated.
[12:25:43:375] Timeout.. no data present A
[12:25:43:376] Sending 'test device present' notification.
[12:25:43:381] XPro: 20 01 00 DE
[12:25:43:382] TX: 8C FE F0 3F
[12:25:43:882] Timeout.. no data present A
[12:25:43:883] Sending 'test device present' notification.
[12:25:43:889] XPro: 20 01 00 DE
[12:25:43:889] TX: 8C FE F0 3F
[12:25:44:389] Timeout.. no data present A
[12:25:44:390] Sending 'test device present' notification.
[12:25:44:396] XPro: 20 01 00 DE
[12:25:44:396] TX: 8C FE F0 3F
[12:25:44:897] Timeout.. no data present A
[12:25:44:897] Sending 'test device present' notification.
[12:25:44:903] XPro: 20 01 00 DE
[12:25:44:903] TX: 8C FE F0 3F
[12:25:45:405] Timeout.. no data present A
[12:25:45:405] Receive timed out. Attempt #6, Timeout #5.
[12:25:45:406] Hardware ID query failed: Error
[12:25:45:418] XPro: 20 01 00 DE
[12:25:45:419] TX: 6C 10 F0 3C 05
[12:25:45:456] XPro: 20 01 00 DE
[12:25:45:456] TX: 6C 10 F0 3C 06
[12:25:45:496] XPro: 20 01 00 DE
[12:25:45:497] TX: 6C 10 F0 3C 07
[12:25:45:531] Serial Number: 5287KH07Q
[12:25:45:545] XPro: 20 01 00 DE
[12:25:45:545] TX: 6C 10 F0 3C 14
[12:25:45:575] Broad Cast Code: YHTP
[12:25:45:586] XPro: 20 01 00 DE
[12:25:45:586] TX: 6C 10 F0 3C A0
[12:25:45:611] MEC: 0
Attachments
not sure what car 12623279.bin
(1 MiB) Downloaded 85 times
not sure what car 12623279.hpt
(404.92 KiB) Downloaded 81 times
User avatar
Gampy
Posts: 2330
Joined: Sat Dec 15, 2018 7:38 am

Re: PCM Hammer Release 021

Post by Gampy »

It's an unknown to Pcm Hammer OsID: 12623279

As it is showing it is a P01_P59, the default configuration!

What I'm mostly concerned with is it's a 1m file and has this error: [12:25:45:406] Hardware ID query failed: Error
The P10 is the only compatible PCM that should have that error.

So my question is, What PCM ??

Edit;
To answer my own question, when hooked to any PCM with an unknown OsID, Pcm Hammer assumes it's a P01_P59, thus if hooked to a P10 or P12 it will fail the Hardware ID lookup.

And a bit of research on my own: it is a P12 in a 2007 Saturn Ion 4dr Quad Cpe Red Line *Ltd Avail*
Intelligence is in the details!

It is easier not to learn bad habits, then it is to break them!

If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
kur4o
Posts: 948
Joined: Sun Apr 10, 2016 9:20 pm

Re: PCM Hammer Release 021

Post by kur4o »

This is the 2mb file. It is the earlier version of that OS.

Here is the update list, all are 2mb. There is a big chance these are the all 2mb OS used.

Code: Select all

12627885	0000F942	New software with driveability and fuel economy improvements achived by decreasing the time TCC will be unlocked due to a misfire rough road event.
12613422	000079CF	New software with diagnostic enhancements for DTC P0483.
12611642	000000C2	New software with diagnostic enhancements for P0443.
12609805	0000D31D	Operating system
Attachments
2007 Chevrolet Trailblazer_4.2L_OSID 12613422.bin
(2 MiB) Downloaded 92 times
Post Reply