PCM Logger 21 - Testing

[bubba2533 Profile]

I've been using PCM Logger for testing of my new custom OS and I've found some issues.

I'm going to try and document the issues that I've had so that they can possibly be reproduced and resolved.

Logging Halted Issue:
I've been able to reproduce this error multiple times.

1. Open PCM Logger
2. Connect Device to PC (VX Nano in my case)
3. Select Device
4. Select Parameters Tab
5. Error "Logging Halted" in Display Area
6. Selecting a parameter to log does nothing

Debug Log:

Code: Select all

[10:26:43:880]  PCM Logger
[10:26:43:880]  Thursday, May 26 2022 @10:26:43:88
[10:26:43:880]  Initializing J2534 Device
[10:26:43:880]  Loaded DLL
[10:26:44:495]  Connected to the device.
[10:26:44:526]  Battery Voltage is: 12.753
[10:26:44:682]  Protocol Set
[10:26:44:698]  Device initialization complete.
[10:26:44:698]  ValidDeviceSelectedAsync started.
[10:26:44:698]  TX: 6C 10 F0 3C 0A
[10:26:44:917]  RX: 6C F0 10 7C 0A 04 88 20 33
[10:26:44:948]  ValidDeviceSelectedAsync ended.


Error:

Logging Halted.PNG (24.29 KiB) Viewed 226 times

[bubba2533 Profile]

PID Boolean Profile Issue:
I've been able to reproduce this error multiple times.

1. Connect Device to PC, Open PCM Logger, Select Device
2. Select Profiles Tab and Open Basics Profile
3. Open Parameters Tab and add Boolean Parameters "Cold Startup" & "Loop Status" (Both are from PID 1105)
4. Open Profiles Tab and Save As new profile
5. Close PCM Logger and re-open
6. Select Parameters Tab and now 2 "Cold Startup" Parameters are listed

Before Closing PCM Logger:

PID Boolean Issue Before Closing.PNG (36.26 KiB) Viewed 223 times

After Closing and Reopening:

PID Boolean Issue After Close & Reopen.PNG (30.64 KiB) Viewed 223 times

[NSFW]

Thanks for reporting these. I'll look into it.