PCM Hammer P04 Support Project
-
- Posts: 214
- Joined: Sat Dec 18, 2021 8:15 am
- cars: 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Re: PCM Hammer P04 Support Project
Okay so there is alot of talk about the different GM PCMs and the reluctor wheel on the crank, and this has been on my mind alot lately. What is it about a PCM that makes it use a certain reluctor wheel? Is it in the software or is it hardware on the circuit board? I know that the reluctor wheel can be physically removed from the crank. But I want to experiment with other V8s, even ones that are distributor run using an P01/P59.
Last edited by darkman5001 on Fri Mar 31, 2023 7:52 am, edited 1 time in total.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer P04 Support Project
It depends on the system. In this case the logic is in the ignition module, and could be analog circuitry. In other types of PCM its in PCM firmware. Its a question of both electrical compatibility, and what the PCM is built to expect.
In my case I'm running a GM 6+1 already on a D1927a ignition module, back to an '808 pcm with our realtime nvram kit. So this means that I could probably keep the same trigger if I went to one of these 4 Cyl American PCMs that use the 6+1 ( aka7).
Ive been looking at HDW 16268310.. Is that also a P08, or something else? If so, anyone know what? Its 00-02 Chevrolet Cavalier among others.
In my case I'm running a GM 6+1 already on a D1927a ignition module, back to an '808 pcm with our realtime nvram kit. So this means that I could probably keep the same trigger if I went to one of these 4 Cyl American PCMs that use the 6+1 ( aka7).
Ive been looking at HDW 16268310.. Is that also a P08, or something else? If so, anyone know what? Its 00-02 Chevrolet Cavalier among others.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: PCM Hammer P04 Support Project
Antus,antus wrote:It depends on the system. In this case the logic is in the ignition module, and could be analog circuitry. In other types of PCM its in PCM firmware. Its a question of both electrical compatibility, and what the PCM is built to expect.
In my case I'm running a GM 6+1 already on a D1927a ignition module, back to an '808 pcm with our realtime nvram kit. So this means that I could probably keep the same trigger if I went to one of these 4 Cyl American PCMs that use the 6+1 ( aka7).
Ive been looking at HDW 16268310.. Is that also a P08, or something else? If so, anyone know what? Its 00-02 Chevrolet Cavalier among others.
The Cavalier using the 2.2l OHV and 2.4l Twin Cam motors used a P08. (I THINK the 2001+ used the Eco)
The one's using the 2.2l Ecotec used the P11 which has a different case and connectors!
Mike
Re: PCM Hammer P04 Support Project
Antus,
That number shows it fits a 2000 Pontiac Sunfire 2.2L, my info shows it could be a P08 or P11, then consider what Mudduck514 states above, it is a P08, if it looks like a P01.
My info shows the 1997-2003 Chevy S10 Pickup and GMC Sonoma with the 2.2L (L43/LN2) also uses the P08.
-Enjoy
That number shows it fits a 2000 Pontiac Sunfire 2.2L, my info shows it could be a P08 or P11, then consider what Mudduck514 states above, it is a P08, if it looks like a P01.
My info shows the 1997-2003 Chevy S10 Pickup and GMC Sonoma with the 2.2L (L43/LN2) also uses the P08.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: PCM Hammer P04 Support Project
Let's try this again - MAYBE it will post the picture!
Mike
Mike
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: PCM Hammer P04 Support Project
Ok, so hdw 16268310 looks like it is the P08. So I have one on the way to see if we can add it. And it looks like it ran from 2000 through to 2002.
- Attachments
-
- s-l1600b.jpg (42.78 KiB) Viewed 1008 times
-
- s-l1600t.jpg (41.44 KiB) Viewed 1008 times
-
- s-l1600c.jpg (40.54 KiB) Viewed 1008 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: PCM Hammer P04 Support Project
Connector for P05 and P11 PCMs
P05 P11
P05 P11
Re: PCM Hammer P04 Support Project
To clarify, is it 3 Connectors for P11, 2 for the P05 ??
-Enjoy
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: PCM Hammer P04 Support Project
Gampy,
Just the opposite:
The P05 has 3,
The P11 has 2.
Mike
Just the opposite:
The P05 has 3,
The P11 has 2.
Mike
Re: PCM Hammer P04 Support Project
Thank you sir very much for clarifying that.
Anybody have or know were to get a P08 bin, looked at gearhead, couldn't seem to find any.
-Enjoy
Anybody have or know were to get a P08 bin, looked at gearhead, couldn't seem to find any.
-Enjoy
Intelligence is in the details!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!
It is easier not to learn bad habits, then it is to break them!
If I was here to win a popularity contest, their would be no point, so I wouldn't be here!