3.2L Frontera with Gen3 LS1 PCM

They go by many names, P01, P59, VPW, '0411 etc. Also covering E38 and newer here.
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by VX L67 Getrag »

Awesome, nice work & can't beat that for $20...I wish I had 1 to play with it supposedly uses a common trigger wheel to make it compatible with a few things!
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by MudDuck514 »

There are 3 Rodeo's in the salvage yard near me.
Do they have the same 3.2l engine as in this thread?

Mike
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by antus »

There are many different model Rodeos, with different PCMs and engines. If one of them is a 2002 with a 3.2L V6 it probably does.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Rickky bobby
Posts: 20
Joined: Sun Sep 12, 2021 4:17 am
cars: GM/GMC

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by Rickky bobby »

things I came across. manual is different then auto for broadcast code (bcc).
Attachments
Screenshot_20230527-020006_Samsung Internet.jpg
Rickky bobby
Posts: 20
Joined: Sun Sep 12, 2021 4:17 am
cars: GM/GMC

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by Rickky bobby »

manual trans
Attachments
Screenshot_20230527-020040_Samsung Internet.jpg
Rickky bobby
Posts: 20
Joined: Sun Sep 12, 2021 4:17 am
cars: GM/GMC

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by Rickky bobby »

when selecting sales make it asked if Holden or Isuzu. module part number and broadcast number is different with manual trans vs auto transmission.
MudDuck514
Posts: 397
Joined: Wed Jul 05, 2017 8:30 am
cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E
Location: North TX, USA

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by MudDuck514 »

antus wrote:There are many different model Rodeos, with different PCMs and engines. If one of them is a 2002 with a 3.2L V6 it probably does.
Thanks Antus.

BAD news is they HAD a 2002 listed when I posted the question.
I just checked and they still have a '99 and '01 model.
They typically send them to the crusher after 60 days on the yard.

Mike
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by antus »

At this stage it's looking very similar to the P08, its possible the P08 kernel in the develop branch of pcmhammer will work. But since we're not getting OSID back it cant just be added to the database in the app. If anyone with the skills who has one of these wants to they could hack up the develop source code to make a build that forces pcmhammer to use the p08 definition, and see if it reads. Then again that same person could test Kur40s script as well.

I like Isuzu as a brand and am interested to get one of these but not in too much of rush as it'd be good to finish off the support for the ones we've started before we get too far ahead of ourselves.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by antus »

I had a spare couple of hours this afternoon, so I went to my local wrecker and had a look at a couple of Aussie 2002 V6 Petrol Rodeos. Both had Isuzu ITEC PCMs though (Hitachi), not like the one in this thread. The ITEC was mounted on the top of the engine and had a single long connector on each end. Definitely not a Delphi PCM. :thumbdown:
Attachments
20230528_140818.jpg
20230528_140818.jpg (455.44 KiB) Viewed 1208 times
20230528_140821.jpg
20230528_140821.jpg (345.19 KiB) Viewed 1208 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: 3.2L Frontera with Gen3 LS1 PCM

Post by VX L67 Getrag »

Nah the 1's in this thread were just simple metal spring u clips like on vt air filter box holding on top of passenger mud guard.
Dead giveaway as soon as you see it, looks identical the the Gen3 LS1 pcm's.
Post Reply