PE Rpm vs Tps% Threshold

For questions relating to the configuration and use of tunerpro
User avatar
Posts: 38
Joined: Sun Dec 17, 2017 9:12 pm
Location: The "Riff"

PE Rpm vs Tps% Threshold

Postby VTXU8 » Thu Dec 29, 2022 5:18 pm

With PE RPM vs TPS% THRESHOLD.

Does this mean when the tps reaches a certain percentage at an rpm in the table, that PE kicks in? Say in the PE table setting at 1200rpm @ 50% tp, that's when PE activates?
Sorry if it's a dumb question. Just want to know how it works.

Using The1's enhanced $A6 for VT 5L with supercharger only run on pulp98. I do have a log but it's pretty ugly atm
Last edited by VTXU8 on Sun Jan 01, 2023 7:34 pm, edited 1 time in total.

Posts: 146
Joined: Fri Feb 24, 2017 11:27 am

Re: PE RPM vs TPS% THRESHOLD

Postby gmtech825 » Thu Dec 29, 2022 10:31 pm

basically yes, there are other delay parameters that must expire before it will enable though. I usually disable those so it kicks in based on throttle/ RPM only.

User avatar
Posts: 38
Joined: Sun Dec 17, 2017 9:12 pm
Location: The "Riff"

Re: PE RPM vs TPS% THRESHOLD

Postby VTXU8 » Thu Dec 29, 2022 10:37 pm

Great. Thanks for the reply. So basically zero out other PE tables and just use base PE throttle/ rpm.

Posts: 146
Joined: Fri Feb 24, 2017 11:27 am

Re: PE RPM vs TPS% THRESHOLD

Postby gmtech825 » Fri Dec 30, 2022 1:49 am

I'd need to look closer at what you are working on, but don't just zero everything. for example in most cases there is an ect threshold you would want to max out because if your ect is above that amount it actually delays PE mode.

User avatar
Posts: 38
Joined: Sun Dec 17, 2017 9:12 pm
Location: The "Riff"

Re: PE RPM vs TPS% THRESHOLD

Postby VTXU8 » Fri Dec 30, 2022 8:51 pm

Okay, so there are 6 PE tables to work with. One is a base and the rest are variables that effect the main table, I guess. So is PE similar to AE where it works with a quick stab of the throttle but at a defined TPS% with the other PE's factors?

Sorry mate, I just want to understand how all the PE tables work and how they affect each other.
Attachments
PE TABLES.jpg

Posts: 146
Joined: Fri Feb 24, 2017 11:27 am

Re: PE RPM vs TPS% THRESHOLD

Postby gmtech825 » Fri Dec 30, 2022 10:39 pm

sorry, I missed what you were working on originally. I'm not that familiar with these so someone else will probaby have to chime in. the tables i was referring to are for enable delays. things like rpm, ect, and torque delays before it will enable PE.

User avatar
Posts: 38
Joined: Sun Dec 17, 2017 9:12 pm
Location: The "Riff"

Re: PE RPM vs TPS% THRESHOLD

Postby VTXU8 » Fri Dec 30, 2022 11:23 pm

No problem.

User avatar
Posts: 38
Joined: Sun Dec 17, 2017 9:12 pm
Location: The "Riff"

Re: PE Rpm vs Tps% Threshold

Postby VTXU8 » Wed Jan 04, 2023 3:24 pm

Okay.I will figure it out :study:

Return to Tunerpro

Who is online

Users browsing this forum: No registered users and 1 guest