$$ or beer in exchange of showing a noob the ropes

Holden Delco ECU and PCM Tuning
Posts: 5
Joined: Sun Sep 17, 2017 7:25 am

Re: $$ or beer in exchange of showing a noob the ropes

Postby chipb » Thu Oct 12, 2017 7:43 pm

Ah cheers thanks a lot guys.
The wideband i will need a bit of know how to where i wire it into the ecu. Then by me doing that will it work straight off the bat or will some other changes need to take place for it to work?

Site Admin
User avatar
Posts: 4869
Joined: Sat Feb 28, 2009 8:34 pm

Re: $$ or beer in exchange of showing a noob the ropes

Postby antus » Mon Oct 16, 2017 9:16 am

The default settings are right for most widebands. If its out adjust the wideband 0 and 5 volt settings to match the specs for your hardware. The signal pin is documented with the other pins in the 12p download zip. You'll probably need to move the stub of an unused pin like ac request in the loom plug as the wideband pin isnt used in factory calobration and its not usually populated.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Previous

Return to Holden ECUs

Who is online

Users browsing this forum: No registered users and 2 guests