24x 58x reluctor wheels

Holden Delco ECU and PCM Tuning
User avatar
Posts: 121
Joined: Wed Jun 08, 2016 8:56 pm

24x 58x reluctor wheels

Postby 80gus » Tue Jan 09, 2018 3:29 pm

Anybody have a use for these, I used em for testing vats removal ect, now I have a running motor in both configurations I don't need them anymore. Double signal, I revolution is 720deg of crank. I used to bolt them to my lathe to test. You pay the freight and you can have them. Prefer to go to someone that will use them than scrap metal they were nitrogen cut so give perfect signal
Attachments
IMG_5408.JPG
IMG_5407.JPG

Site Admin
User avatar
Posts: 5196
Joined: Sat Feb 28, 2009 8:34 pm

Re: 24x 58x reluctor wheels

Postby antus » Thu Jan 11, 2018 2:54 pm

What is the diameter?
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 121
Joined: Wed Jun 08, 2016 8:56 pm

Re: 24x 58x reluctor wheels

Postby 80gus » Fri Jan 12, 2018 12:52 pm

There about 350mm so I could get good resolution

Return to Holden ECUs

Who is online

Users browsing this forum: No registered users and 3 guests