help with upcoming build

[Built-vs-t5-ute]

Ah ok. What's the difference between 11p and 12p?

[antus]

11P is for the '424 and 12P is for the '808 (and follow on types). See the pcmhacking hardware guide. They are very similar, but the '424 puts slightly more control in the ecu software, and includes hardware/software to drive the 4L60E trans, so the spark cut became possible (by manipulating the dwell out of range). On the '808 this was hardware and could not be set. You dont need to run the electronic auto on the '424 but that is what it came out with on the VR.

[Built-vs-t5-ute]

Ah ok awesome thanks for clearing that up. Yeah I have a lot of the pdfs and info on there and will be going through it over the next few days.

[v6bucket]

A scatter shield is a effectively steel bellhousing.

[Built-vs-t5-ute]

Yeah cheers man. As in like a whole replacement bellhousing made from steel? Are they expensive?

[vlad01]

yeah and I couldn't find one for v6 either. Quicktime bellhousings are around 650 usd.

[delcowizzid]

Company over here make steel bellhousing for any engine to any box they do lots of v6 to Holden 3 speed etc for speedway

[Built-vs-t5-ute]

What's the company called?

[delcowizzid]

Mark walford engineering here's his facebook https://m.facebook.com/Mark-Walford-Eng ... 388085682/

[delcowizzid]