PCMHacking Frequently Asked Questions (FAQ)

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 8
Joined: Tue Jul 03, 2018 10:32 pm

Re: PCMHacking Frequently Asked Questions (FAQ)

Postby LT1truck » Tue Jul 17, 2018 1:54 pm

thanks very much!

Posts: 46
Joined: Sun Jul 24, 2016 4:38 pm

Re: PCMHacking Frequently Asked Questions (FAQ)

Postby vHell83 » Fri Mar 01, 2019 9:18 pm

hi, I am trying to write to a 29ee010 chip with a GX 4x4 chip burner.

I cannot find the above chip type, the closet I find is 29F002 which is 256KB vs 128KB (The chip in the burner)

I decided to try and write to it anyway, i used HxD to verify and the parameters are way off. Could someone please point me in the right direction?

Below are relevant codes

Image
Image

c:\users\user\desktop\vx_v6_sc_%24a5k_enhanced_v1.3f\vxnovat.bin.
Configuration OK!
This software is updated already.
<<29F002>>
ID check skipped
Reading... Buffer
Elapsed time: 7.32 seconds.
Read completed.
ID check skipped
Writing... Buffer
Elapsed time: 2.72 seconds.
Device write completed OK
ID check skipped
Verifying... Buffer
Device is verified
Elapsed time: 7.34 seconds.

Site Admin
User avatar
Posts: 5608
Joined: Sat Feb 28, 2009 8:34 pm

Re: PCMHacking Frequently Asked Questions (FAQ)

Postby antus » Fri Mar 01, 2019 9:49 pm

Please start a new thread for this. But short answer is thats a flash memory, not the traditional eeprom type we mostly use and being page erase your going to need the right memory mapping, close but not the same wont work.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Previous

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 5 guests