Custom Tuned Bins

Post by **Holden202T** » Mon Jan 03, 2011 3:52 pm

i think your going to have to clarify more .... what exactly are you meaning when you say sensors ? which ones do you want to do away with ?

Phear8me · Post by **Phear8me** » Mon Jan 03, 2011 4:48 pm

i was thinking with no security /vats so no need for bcm etc if that helps at all
just a basic tune for vn v8 sort of thing to make sure its all working in an older car

ToyHicko · Post by **ToyHicko** » Mon Jan 03, 2011 5:40 pm

I'd suggest you have alok at OSE $12P thread https://pcmhacking.net/forums/view ... f=27&t=356 and the custom tunes already available in the zip file and in https://pcmhacking.net/forums/view ... ?f=7&t=375

crewman · Post by **crewman** » Sat Jan 08, 2011 12:01 am

hello everybody does anybody have a 12p 5l holden twin turbo 2bar file to get me going the car runs on e85 but anthing to get me started would be greatly appreciated thanks in advance

DieselBob · Post by **DieselBob** » Mon May 30, 2011 10:04 pm

Ok got this off a modded MEMCAL
Unknown Vehicle MEMCAL had a Black Base(512?)
File name is my ID efforts and everything after V8 is what was on the sticker on the chip
Any ideas???
Ran MEMCAl ID it came up with $58 like $11 did a basic compare in TP5 to BMZK
Most of the differances made sense.
Opened the VE table and that was not right.

Bob

UNKNOWN_$58_512K_VS_V8_A-HP2_SN601N673.bin: (64 KiB) Downloaded 523 times

Doctor Bob · Post by **Doctor Bob** » Mon May 30, 2011 10:55 pm

HP-2 looks like a Chiptorque type ID

Post by **Holden202T** » Mon May 30, 2011 10:59 pm

looks alright to me for $83 (VS V8) .... opened it with Yoda's $83 xdf and everything so far lines up perfectly.

haven't compared it to anything though.

DieselBob · Post by **DieselBob** » Tue May 31, 2011 5:17 pm

Thanks guys

Had a quick look using $83 looked better..
The ID address shows $58 in my bin and $58 in the $83 one i grabbed from the bin thread
137 differences as against 1196 for the $58 bin
I'm a bit confused up till now the bin files i've been using have all had the correct ID Bytes...
Using the ID tool and Dr Bobs tables the ID should be $58 not $83

Post by **Holden202T** » Tue May 31, 2011 10:54 pm

yeah i can't explain that to ya, only reason i went for $83 is cause thats what my mates vs v8 auto was so started there!

Post by **The1** » Tue May 31, 2011 11:12 pm

It looks like a BPYS $58, use the $11 xdf like this one $11B_V103.xdf which is in memcalid tool, you can see the spark tables and ve slightly modified and RPM limit raised

Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins

Re: Custom Tuned Bins