VY PCM - 16269238
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: VY PCM - 16269238
Hmmm wrong part of the code then...
Ok then.. try 0x5116 for DSZT, and seems to line up with DKDC (and probably others too). Its set to 0xFF and looks like divide by 40 to get seconds of torque control. So 0x00 would disable it, or you could make it a lower number to retain some torque control.
Ok then.. try 0x5116 for DSZT, and seems to line up with DKDC (and probably others too). Its set to 0xFF and looks like divide by 40 to get seconds of torque control. So 0x00 would disable it, or you could make it a lower number to retain some torque control.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VY PCM - 16269238
isn't that what the go pedal is forantus wrote:or you could make it a lower number to retain some torque control.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VY PCM - 16269238
Thanks Ryan
Is this a X*0.1 for AFR Delta table? If so, I'm not seeing anythign that would give me 17.0:1 Command AFR :S
Ant
Will give it a try and see what happens...
darcy
Is this a X*0.1 for AFR Delta table? If so, I'm not seeing anythign that would give me 17.0:1 Command AFR :S
Ant
Will give it a try and see what happens...
darcy
Re: VY PCM - 16269238
not sure if it's the same as vs, but vs is an addition to afr.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VY PCM - 16269238
Correct, its a delta value just like VS. The equation is (1638.4/(111-x))-(1638.4/111)
Re: VY PCM - 16269238
Cheers Guys
Re: VY PCM - 16269238
well i finally got my xtreme aldl cable today, thought ill quickly read some vx/vy ecus i had laying around here that have been useless until now,
attached are some bin files to share and check the xdf files that is posted up is correct against or not,
anyways attached are 2 x vx and 1 x vy
cheers
attached are some bin files to share and check the xdf files that is posted up is correct against or not,
anyways attached are 2 x vx and 1 x vy
cheers
- Attachments
-
- vy.dtcf.flash.bin
- DTCF VY AUTO
- (128 KiB) Downloaded 429 times
-
- vx.dmty.flash.bin
- DMTY VX AUTO
- (128 KiB) Downloaded 433 times
-
- vx.dkdc.flash.bin
- DKDC VX AUTO
- (128 KiB) Downloaded 404 times
Re: VY PCM - 16269238
has anyone got a xdf for the vx bins, cause looking at them there diferent to the vy ones correct?
Re: VY PCM - 16269238
What's the checksum calculation for the VY?
Would be great to add it to the XDF rather than have to wait for teh flashtool to checksum the pcm on each flash.
I seem to have trouble writing calibrations when Flashtool pops up to correct it, but all smooth if I have it correct to begin with.
Cheers
darcy
Would be great to add it to the XDF rather than have to wait for teh flashtool to checksum the pcm on each flash.
I seem to have trouble writing calibrations when Flashtool pops up to correct it, but all smooth if I have it correct to begin with.
Cheers
darcy
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VY PCM - 16269238
Its 2000-1FFFF but need to ommit the bytes at 4000-4007 (which includes the checksum). The Tunerpro checksum plugin feature will solve this issue though.
Yeah the trouble is a timeout I think (another member has similar issues), something on the bus must start talking again so will be changing it to look for heartbeat and disable chatter again. If your really fast at selecting yes to correct it it may not happen. Have not tried that though.
Yeah the trouble is a timeout I think (another member has similar issues), something on the bus must start talking again so will be changing it to look for heartbeat and disable chatter again. If your really fast at selecting yes to correct it it may not happen. Have not tried that though.