VY PCM - 16269238

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

VY PCM - 16269238

Post by VL400 »

Here is a picture of a 6 cyl VY PCM (if anyone wants a 15MP high res shot PM me). It uses a AMD 29F010B flash chip (U11) in place of the memcal.

VYPCM_SM.jpg
VYPCM_SM.jpg (199.76 KiB) Viewed 10112 times
UCMatt
Posts: 86
Joined: Mon May 11, 2009 4:00 pm
cars: VE Sportwagon
VYExec
VN V8 UC Torana Hatch

Re: VY PCM - 16269238

Post by UCMatt »

Cool!
Got a realtime hack for it yet? :wall:
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: VY PCM - 16269238

Post by Holden202T »

knowing VL400 it wont be long :punk:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: VY PCM - 16269238

Post by delcowizzid »

see it still has a spot for a memcal header :mrgreen: much like a vs pcm but less componants same 3 plug setup too wonder if a vs style would be swappable to the harness for conversions
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
UCMatt
Posts: 86
Joined: Mon May 11, 2009 4:00 pm
cars: VE Sportwagon
VYExec
VN V8 UC Torana Hatch

Re: VY PCM - 16269238

Post by UCMatt »

Looks interesting.
I only see 6 injector drivers on the board........ :sad2:
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: VY PCM - 16269238

Post by VL400 »

Will be awhile off yet for a realtime! Plus its a bit of a nightmare to work with. The flash chip probably wont programmable on board so yeah would have to add a board to the row of pins above it. All the pins seem to be there from a quick buzz out.

The VS connectors have different key ways so not direct plugin unless you do some filing, much like the VN to VR plugs. Pinouts, well you would have to check all that out.

Yeah only 6 drivers, but has room for two more - pretty hard to buy them, would have to remove them from another PCM probably. Hopefully you have a mate that wants to run one on a 4 cyl :mrgreen:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: VY PCM - 16269238

Post by delcowizzid »

look the same as VS injector drivers i have 6 here if anyone ever needs any :mrgreen: i think the flash chip should be flashable on board if things like efilive/vcm suite etc can flash it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
GONZO
Posts: 55
Joined: Sun Mar 01, 2009 8:53 pm

Re: VY PCM - 16269238

Post by GONZO »

I WANT ONE!

I reckon this should be where we focus our efforts. Is it still using a 6811 based code or is it 16 bit?

It will be a far more powerful ECU.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: VY PCM - 16269238

Post by Holden202T »

whats wrong with an 808 with RT conversion :thumbup:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: VY PCM - 16269238

Post by delcowizzid »

yeah you guys can keep your horrible MAF based sequential ecu LOL :mrgreen: joking but when you come up with a MAP tune to suit ill be keen :thumbup:
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply