no hardware found

[boosted falcon]

hi, im a complete newbie here u will have to excuse the amature qustions just a bit lost,
i recently purchesd the aldl cable and software to hook up to a vs commodore from delco hacking.

iv installed tunerpro 5 rt and get connection and can read data lists, but when loading down the bottom says hardware not found and i cant get it to emulate, can anyone point me in the right direction, to set this up correctly.

im using adx file- vsv6v1.01.adx
xdf file-6e.xdf
bin file-apyp

these were provided on disk . thanks

[VL400]

Have you contacted the (ebay?) seller for support?

You wont be able to emulate/tune without an NVRAM installed.

[boosted falcon]

yeah he told me to look here but i cant work it out , aparently the cd has everything on it so im assuming i set it up incorrectly.

to be honest i purchesed this to read and clear codes i had now idea it was this complicated, ( 320950845418) is the ebay item number
iv also installed efilive v4 and flashtool witch was supplied with disk and cant get to work either. is there a guide or a manuel to tunerpro 5 rt ???

[antus]

Yes, it is very complicated. Try haveing a read of the guides and the faq here https://pcmhacking.net/forums/view ... f=7&t=1396 (also linked to under FAQ at the top of the forums).

[boosted falcon]

i msg tell falla from ebay but no respose yet, i read the guides and they were a great help i think im getting a bit closer.

i downloaded ose plugin v 1.25 and vcredist_x86

and set them up in prefrences , the 5 blue tabs up top have come up and i hit the blue squre start emulator and down the bottom left turned green and says emulating ....... but nxt to that still still say no hardware????

[VL400]

As you dont have an NVRAM you cannot initialise hardware, you cannot emulate (its for tuning only) and wont require the plugin.

With one of these you can tune though .. https://pcmhacking.net/forums/viewtopic.php?f=14&t=166

[boosted falcon]

yeah i think this is a bit technical for me, so with out nvram the data list, dash and charts is the max info i can retrive??

there also was efilive v4 and flashtool on cd but was trying to work this out first,
ill assume these are used for clearing fault codes ??

[VL400]

You can log data in TunerPro/EFILive and clear fault codes on a VS with a data interface, but cant tune a VS with just a data interface.

[SPArKy_Dave]

I too am having issues linking Tunerpro RT to a VS commodore.

My old man bought me an ebay ALDL cable - http://www.ebay.com.au/itm/USB-ALDL-Dia ... 2ec0b6b712

It came with EFILive V4 Eval version, (which I haven't got to work properly yet)
I can get chatter happening, but no live dash values, not even in the sensor item list.


The car is a stock standard series two VS Commodore V8 Ute

In tunerpro, I'm running the adx file - 16176424.adx
(which I found in delcowizzid's adx thread)

I worked out how to create a virtual dashboard, and some monitoring graphs etc.
(I'm still learning on the history tables section)

Tunerpro finds the cable, and verifies that everything is ok.
When I try to connect to the vehicle, the gauges just bounce. I can see the proper values displayed for split seconds, when the bounces occur, but nothing more.
No proper live values display in the item lists either.

Is it me, the cable, or the car?

[antus]

You probably should start your own thread instead of posting a new question to the middle of boosted falcons, but short answer is you should get the one of the two latest VS adx files from https://pcmhacking.net/forums/view ... ?f=10&t=29 . The two types are for different wideband types, but as you are not using wideband, either should work.