VT $A5 V6 Definition Info

[Holden202T]

maybe they use the same number from 4800rpm onwards

[VL400]

Correct, open loop AFR only goes to 4800RPM and then uses the same value from there on.

[yoda69]

Have Updated the XDF for Variants F & K in the first post of this thread to include new MAF Info to be used in conjunction with the thread in General tuning on VS-VY MAF Tuning.
https://pcmhacking.net/forums/view ... f=28&t=659

yoda69

[spectral]

Hey guys,
Thanks so much for the work on these definitions, excellent stuff.

Just wondering if there was any progress on the $A5C xdf?

The main feature I was hoping to change was the highspeed thermofan cut in/out temp levels, and the VATS (which of course is already defined in the XDF).

Cheers

[charlay86]

I've added some of the spark tables for LPG to this XDF.

[yoda69]

Have updated to V1.9, fixed checksum and added a few more tables and scalars.
Thanks Charlay for the LPG stuff in the Variant F, Note that this only works with a factory gas setup. If you have a non factory gas setup where they use a separate box to disable the fuel injectors (usually a relay on the injector ground line) rather than having the ECU do it, these tables will not work.

Thanks,
yoda69

[customefi]

can i change the speed input settings on a cnpr bin to account for a diff ratio change in an engine conversion

thanks guys

[yoda69]

VT V6 XDF's updated in first post of this thread thanks to The1.

Happy Tuning

[customefi]

does anyone know if i can change the speed parameters on a cnpr bin to suit larger tyre diameter
thanks

[Sudsy]

I know this is old but i can't open the links in the post