Stock Holden Bin Files

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Stock Holden Bin Files

Post by delcowizzid »

bet that took a while LOL took me ages to zip upload and label them the first time you poor bugger
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Stock Holden Bin Files

Post by antus »

CYJN and DRRS have been added, thanks to Monaro253.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Stock Holden Bin Files

Post by antus »

BMZB Added, thanks to VX L67 Getrag
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Stock Holden Bin Files

Post by antus »

A couple of LS1 HSV tunes added
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Stock Holden Bin Files

Post by delcowizzid »

my VXII bin file whos got the xdf :P
mikes vx.bin
(128 KiB) Downloaded 941 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: Stock Holden Bin Files

Post by Gareth »

Any ideas on what should be used in a 96' VS grange? When I got it, it was fitted with a BWCT 424' PCM (5.7lt auto) that had a BWFW memcal (5lt manual). It didn't drive too good like that...

I believe that the motor is a 5lt and not the 5.7lt but not sure.

I fitted a standard 5lt auto 424' to make the auto happy, it doesn't have the correct knock board though.

The best I can come up with is BSAK, anyone else agree?
According to chemistry, alcohol is a solution...
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Stock Holden Bin Files

Post by delcowizzid »

Bmzm and disable knock via the temp scaler.does it have the bluetop injectors
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Gareth
Posts: 2505
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: Stock Holden Bin Files

Post by Gareth »

It's fitted with orange top injectors, why do you suggest BMZM?

BWCT isn't listed, I'll get a read from it and post it up.
According to chemistry, alcohol is a solution...
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Stock Holden Bin Files

Post by delcowizzid »

Bmzm is what I use for auto strokers as a base
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Locked