VT $A6 Holden V8 Definition Info

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Posts: 1103
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

VT $A6 Holden V8 Definition Info

Postby yoda69 » Tue Nov 03, 2009 4:27 pm

Guys,
I've been looking into the Holden V8 bins, and much like the VT V6, there are numerous versions with different offsets.
Based on Antus's Variant breakdown and Dr Bob's memcal site the following is what has been identified:

Variant A
CDUW 5.0L Auto 16234531 180KW Pilot Release

Variant B
CFYZ 5.0L Auto 16234531 180KW Pre Release
CFZA 5.0L Man 16234531 180KW Pre Release

Variant C
CFZC 5.0L Man 16234531 HSV 195KW GMH V8
CFZF 5.7L Man 16234531 HSV 220KW 5.7L GMH V8 w/5spd
CJDN 5.0L Auto 16234531 Std 179KW GMH V8
CJDP 5.0L Man 16234531 Std 179KW GMH V8
CNUL 5.0L Auto 16234531 Police Pack, upto 01/1999


Variant D
CFZB 5.0L Auto 16234531 HSV 195KW GMH V8
CFZD 5.7L Auto 16234531 HSV 220KW 5.7L GMH V8

Variant E
CNPF 5.0L Auto 16234531 HSV 195KW GMH V8
CNPJ 5.0L Man 16234531 From 01/1999
CNPK 5.0L Auto 16234531 HSV 180KW GMH V8


Variant F - VS Series 3 Ute. (Use Variant C xdf)
CJYM 5.0L Man 16234531 Series III VS Ute, Recalled, use 'DRRT'
CJYN 5.0L Auto 16234531 Series III VS Ute, Recalled, use 'DRRP'
CNPC 5.0L Man 16234531 VS Series III 195KW Ute, Recalled, use 'DRRR'
CNPD 5.0L Auto 16234531 VS Series III 195KW Ute, Recalled, use 'DRRS'
If anybody has copies of DRR/P/T can you please PM me a copy. :thumbup:

At the moment I'm working on Variant C, as this is the one with the most bins for doing comparisons. Will hopefully have something up shortly, as a lot of the tables are similar to the V6 so have been "relatively" easy to find and identify.

If anybody has any bins or info to contribute, please add it here or PM me.
Thanks,
yoda69
:wall:
Updated to V1.1 for Variant C & E on 17-Apr-2010
Updated to V1.2 for Variant C&E on 8-Aug-2010 - Added Fan Settings (need to be confirmed if proposed no BCM settings work) and Rev Limit Info
Update: 12-Dec-2010. Variant F VS Series 3 can use the Variant C xdf.
Updates: 22-Jan-2012. Variants C&E thanks to The1
Update: 26-Mar-2012 Fixed VATS flag in C&E
Last edited by yoda69 on Sun Jan 22, 2012 10:40 am, edited 8 times in total.

User avatar
Posts: 195
Joined: Mon Mar 02, 2009 10:58 pm
Location: Melbourne Vic.

Re: VT $A6 Holden V8 Definition Info

Postby Doctor Bob » Wed Nov 04, 2009 11:13 pm

the last 4 you have listed are VS bins

Posts: 1103
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: VT $A6 Holden V8 Definition Info

Postby yoda69 » Thu Nov 05, 2009 6:36 am

Thanks Dr Bob,
Didn't even think of looking at Series 3 Ute, as soon as I read your post it was Dohhhh.

Thanks for the help,
yoda69

User avatar
Posts: 4815
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: VT $A6 Holden V8 Definition Info

Postby delcowizzid » Thu Dec 10, 2009 6:12 pm

anyone found the VATS flag in the VT V8 bins yet
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 1103
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: VT $A6 Holden V8 Definition Info

Postby yoda69 » Thu Dec 10, 2009 7:36 pm

Haven't had a chance to confirm yet, but try $3808 Bit 3 for Variant C & E.
If your using a different Variant let me know and I'll see if I can find it.

yoda69

User avatar
Posts: 4815
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: VT $A6 Holden V8 Definition Info

Postby delcowizzid » Thu Dec 10, 2009 7:43 pm

cheers mate see how we go
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 1103
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: VT $A6 Holden V8 Definition Info

Postby yoda69 » Sat Apr 17, 2010 9:30 pm

I've updated the XDF's on the first post of this thread for Variant C & E.
As far as checksum, I worked out recently that for the bins I checked so far are $2008-$1FFFF and stored at $2006/7, this is also the same with $A5.
For Variant E compared to Variant C there appears to be an offset of +2 bytes starting at $380F to $53B7.

Hopefully this should get things moving a bit.

If anybody has any further info either email or PM me or post it up here.

Thanks,
yoda69
:driving:

Posts: 547
Joined: Fri Jul 17, 2009 2:11 pm
Location: GOLD COAST QLD

Re: VT $A6 Holden V8 Definition Info

Postby vn5000 » Sun Apr 18, 2010 5:23 pm

Nice work Yoda ,thanks for that mate . :punk:

Posts: 4
Joined: Tue Jul 06, 2010 12:38 am

Re: VT $A6 Holden V8 Definition Info

Postby 5point7 » Tue Jul 06, 2010 12:49 am

hi all i'm a newb - have had a bit of experience with efilive and the gen 3 pcm's am now looking into the idea of read, mod and burn the ecm in the VT SS 5.0 i have sitting wiating to be put in another car - am wanting some upto the minute info on what you are using to read, mod and burn chips in the 16234531 ECM i have for the VT 5.0L - have looked in to the moates autoprom but they havent answered and i seem to think it isn't supported due to maybe a lack of r n d on the particular ECM so any push in the right direction would be greatly appreciated.... i have the plan to first up remove the VATS so the engine can be run in a stand and then put a manual tune into the ecm to remove tha Auto side of what it currently is regard sand i thank you all

User avatar
Posts: 495
Joined: Thu Sep 17, 2009 2:00 pm
Location: Perth, WA

Re: VT $A6 Holden V8 Definition Info

Postby charlay86 » Tue Jul 06, 2010 1:44 am

You'll need an EEPROM programmer.
this is a popular one that will run on modern PCs - http://cgi.ebay.com.au/True-USB-Willem-ECU-EPROM-BIOS-SPI-universal-Programmer-/310231725975?cmd=ViewItem&pt=AU_B_I_Electrical_Test_Equipment&hash=item483b407797
you might want to check out the "chip/memcal reading/writing" part of the forum :thumbup:

Next

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: Google [Bot] and 5 guests