VT $A6 Holden V8 Definition Info
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VT $A6 Holden V8 Definition Info
Updated to V1.2 with Fan Settings (no BCM info needs to be confirmed, but should work) and Rev Limit Info.
yoda69
yoda69
Re: VT $A6 Holden V8 Definition Info
yoda,
have pm'ed you with a DRRR memcal file
cheers
have pm'ed you with a DRRR memcal file
cheers
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VT $A6 Holden V8 Definition Info
Interesting, other than the checksum the only change is at $AB98 which is in the code and not the data. Has changed from a $05 to a $04 when compared with CNPC from in the VS $A6F area.
Have placed bin below for one of the admin guys to move. yoda69
Have placed bin below for one of the admin guys to move. yoda69
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VT $A6 Holden V8 Definition Info
Thanks, have moved the bin.
As for the change ... looks like someone forgot to turn of 18x interrupts on the V8
As for the change ... looks like someone forgot to turn of 18x interrupts on the V8
-
- Posts: 1215
- Joined: Sun Mar 15, 2009 10:20 am
- cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual - Location: Geelong, VIC
Re: VT $A6 Holden V8 Definition Info
VS Series 3 (Variant F) use the Variant C xdf.
Note: You can not run a VT Variant C bin in a VS Series 3 or vise versa due to different PCM/BCM strategies and instrument outputs. It is just the tables, scalars and flags that have the same locations.
yoda69
Note: You can not run a VT Variant C bin in a VS Series 3 or vise versa due to different PCM/BCM strategies and instrument outputs. It is just the tables, scalars and flags that have the same locations.
yoda69
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT $A6 Holden V8 Definition Info
anyone got the PPK location and does it go high enough for 4.11 diff i have been told it wont go high enough have some tweaks to make to a tune
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VT $A6 Holden V8 Definition Info
0x2022 is the speed sensor value and the calc in TP is X/1024. Its 16bit too.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT $A6 Holden V8 Definition Info
cheers mate ive now changed ppk by 1.33% and multiplied all shift kmh tables by 0.77 should be a good starting spot just have to see if it taps the limiter on shifts and tweak if needed .
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT $A6 Holden V8 Definition Info
i posted the same in the other thread this did fix the ecu reading and shifts as stock but the dash still reads out by the same amount as before hand
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VT $A6 Holden V8 Definition Info
I have just updated the original post with v1.3 of the $A6C xdf that yoda started, its had alot of stuff added to it, mainly in the transmission section but also some other stuff throughout.
I have been using this in a VS Series 3 V8 Auto Ute with realtime bin and its been working a treat!
Please let me know if you see any issues with it.
I have been using this in a VS Series 3 V8 Auto Ute with realtime bin and its been working a treat!
Please let me know if you see any issues with it.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread