36lb injectors
36lb injectors
Hey everyone was just wondering what i should cahnge my flow rate too in my vr 5litre to run a set of 36lb injectors ,any help would be appreciated. THANKS.
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 36lb injectors
should be something like .069
No matter what the question is, the answer is always more horsepower! 
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: 36lb injectors
Thanksmate , does anyone know how to calculate injector flow rates for tunerpro for a vr v8 commie so i can learn this for myself THANKS.
Re: 36lb injectors
Try this thread https://pcmhacking.net/forums/view ... ?f=3&t=334
-
Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 36lb injectors
thats the calculator i used to get the above number!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: 36lb injectors
Thanks fellas fired up the 5litre with the .069 flow rate runs perfect, once i finish the 2bar tune i will post it up in the custom tune section, car is a vrss standard stroke 5litre with a single turbo setup it runs a garrett gt3582r i have taken some pics and if anyones interested in doing a turbo install on their 5litre i am willing to give some pointers and info .Thanks again.