second that!vlad01 wrote:Bosch plugs are just shit in general imho.
marinized v12 running 2 x 808's
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: marinized v12 running 2 x 808's
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
they are NGK bcp6evx did have 7's in it but were fouling due to being too rich in tune forgot to change back after I got the mixtures right
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
Been doing a bit of study on detonation and came accross this article that is a good read
http://qldkev.net/ignition.php
http://qldkev.net/ignition.php
Re: marinized v12 running 2 x 808's
Wow, well written article, thanks for posting
According to chemistry, alcohol is a solution...
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
after reading that article I believe I had a detonation induced pre ignition which is why it was not heard
-
- Posts: 3424
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: marinized v12 running 2 x 808's
Great article. Certainly makes sense why most manufacturers tune there cars rich and then makes you think a bit about what we do with tuning and then thank christ for knock sensors.............
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
Got a new four blade prop was a bit disappointing,just started slipping at 4000 rpm
posted a spread sheet of my test runs with different gearing and props
posted a spread sheet of my test runs with different gearing and props
- Attachments
-
- prop slip compare.jpg (190.93 KiB) Viewed 6348 times
-
- Riviera props.xlsx
- (25.73 KiB) Downloaded 285 times
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
and a quick video of the tacho and speedo to show the amount of slip
https://www.youtube.com/watch?v=W6FnRjuT_z0
https://www.youtube.com/watch?v=W6FnRjuT_z0
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: marinized v12 running 2 x 808's
that's a fair bit!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- jenko
- Posts: 450
- Joined: Wed Jan 29, 2014 3:43 pm
- cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon - Location: Pine mountain .vic
- Contact:
Re: marinized v12 running 2 x 808's
have had a good boating season and finally have got around to doing a log from Aldroid with speed enabled from the gps on the phone I can transfer the file back to pc as an xdl file but tuner pro does not have the gps speed or xyz options in the xdf file is this an option that could be added as it would be usefull for gforces at the track ,just easier to read on laptop with bigger screen.
I have settled on a 12 x 13 3blade prop seems a good compromise for what I use it for
Have posted xdl file of last log if anyone interested
I have settled on a 12 x 13 3blade prop seems a good compromise for what I use it for
Have posted xdl file of last log if anyone interested
- Attachments
-
- 2017-04-15_12.54.56.xdl
- (255 KiB) Downloaded 270 times