marinized v12 running 2 x 808's

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: marinized v12 running 2 x 808's

Post by antus »

Theres something screwy with that adx. I knew you said monitors were broken so I went to dash view first and the guages were not present, but the text was ok at the bottom. I then went to monitors and the data was shown, but I scrolled to the right and tunerpro crashed.

So I restarted it and saved pj.adx as pj2.adx. Then restarted tunerpro to fix any in memory corruption. Now its stable but there are no dash gauges. So definately re-saving the adx fixed the buffer overflow part but doing that without loosing something may be difficult. Ive attached pj2... which you can use to see the monitors. Maybe you can put the guages back in this copy. Or revert to a previous copy of the adx if you have one before it got messed up.
Attachments
pj2.adx
(77.34 KiB) Downloaded 277 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

tried pj2 adx to no avail but it is a version of 1bar petrol with ve adx, so tried that still no good .seeing all data but no data in monitor view .
It is the sane for all previous logs as well .
I think I shall try A full uninstall and reinstall.
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

well reinstall didn't help completely stumped
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

and now after days it s mysteriously working normally
Thanks for help Antus
wish I could enlighten everyone on what the problem was
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

hooked up laptop to adjust idle mixtures ,ecu logged and showed data fine but I could not upload changes emulation was on ,could not even reload bin to ecu .
any ideas ?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: marinized v12 running 2 x 808's

Post by antus »

I assume the RW jumper is set, so possibly is an electrical issue in one of the PCMs? Maybe one of the write line cables has fallen off or shorted? If oseplugin 2 does not get the OK response from both ECMs it'll report error back to TP so a single electrical fault in one of them would cause this.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

Thanks Antus ,shall check write line cables (RW jumpers are set)
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

all ok was linked to one incorrect port was actually virtual port for another scan tool
fixed by uninstalling all com ports and starting again with two fresh com ports
User avatar
jenko
Posts: 450
Joined: Wed Jan 29, 2014 3:43 pm
cars: hilux v6
jaguar v12
mitsubishi lancer
fj cruiser
sv 21 camry wagon
Location: Pine mountain .vic
Contact:

Re: marinized v12 running 2 x 808's

Post by jenko »

currently I am running this in tank fuel pump with the pressure reg removed but one on the fuel rail.

https://www.ebay.com.au/itm/Goss-Fuel-P ... :rk:7:pf:0

I am thinking of running a Bosch 044 as I don't think the Goss pump cuts it .
Looking for advice as whether to leave Goss pump in tank as a lift pump or to remove it and let the Bosch 044 do all the work ?
And how much amps they would draw at 3.0 bar?
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: marinized v12 running 2 x 808's

Post by Holden202T »

id leave it if your going to feed into a surge tank, otherwise no.
Post Reply