marinized v12 running 2 x 808's

[delcowizzid]

haha ant is loving the challenge will be very cool to pull this off

[Holden202T]

Very happy no leaks, motor ran sweet was itching to give it full throttle but no room

looks like theres barely enough room for a 3 point turn let-a-lone a throttle stab!

if it can be done ant will be the one to do it with the ose plugin

[jenko]

i looked at using a serial port switch from ebay to tune twin ecu's flash changes into first ecu flip switch flash to 2nd back and fowards untill tuned

thats how I do it with kalmaker but it is more than twice as long to tune and a real pain cause you have to stay at same conditions for so much longer,boat will be easier than the car as its just a big water dyno,

[jenko]

took the boat out for a spin yesterday worked well ,was going to do some tuning and logging with kalmaker but just got stuck into it and the mouse pointer disapeared and whole thing jammed up had to reboot laptop sick of it Have put off going 12p for to long time to change
here's link to video
https://youtu.be/B0Vk9Ih49FE

[delcowizzid]

haha havnt used kalmaker to tune kalmaker in years i use TP v5 and the kalmaker xdf and adx i put on here so much nicer for log playback

[Holden202T]

yeah i hope you got a data log from all that running, would so be a waste if you didn't :S

looks like she cruises around nicely though!

[jenko]

after mouse jammed was able to use hot keys to log but lost it with the reboot

[Jayme]

are you runnning no3?

[jenko]

yes running NO3 . I have now burnt 12p to the eeproms and am going with tuner pro and newer laptop
Always have had connection dramas with the kalmaker and toshiba dvd 750 every time you want to use kalmaker you have to reinstall comports.
anyway laptop too old and have to make the move

[jenko]

Would it be possible using 12p with usb coms to read from 1 ecu and write to 2 ecu's ?

Antus has done it with a plugin ,tested this morning seems to work fine , excellent work,many thanks for having a go.