lost in space
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: lost in space
Yes it can be accommodated. Tps is easy as its just a linear value, temp sensors are less linear and few people bother programming for different types so it'll cost you a fair bit of time to find all the tables, set up a test rig, calculate the values etc. Generally not worth it when the factory sensor is cheap. Usually its simpler and safer to drill and thread a new hole if your fitting to a different engine.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: lost in space
ok, thanks ... that makes total sense
Re: lost in space
Hello fella's ... has anyone got a list of GM holden injector specs,.... impedance, flow rate , pressure etc, do they use Bosch ?
chance of finding 2.0 lt Camira injectors is probably like looking for rocking horse sh#* trying to source something of similar vaue but maybe jappa ...ta robbie
chance of finding 2.0 lt Camira injectors is probably like looking for rocking horse sh#* trying to source something of similar vaue but maybe jappa ...ta robbie
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: lost in space
i have plenty of 19lb v6 injectors here
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: lost in space
The memcal ID tool has most of that.
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: lost in space
Theres plenty of sets of N13 pulsar injectors and Je camira injectors on ebay. Some of them might even be from the1, who would stand by the quality and provide a flow matched set.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: lost in space
would those suit a 4 cyl 1600 cc ... I'm hoping to get close to 100 bhp / lt eventually ... what do they look like ? ... don't know a lot about injectors, but 19 lb I guess that's / hr, so say .5 lb / hp / hr = 38 hp or 8.64kg / hr = 144 cc H2O / min ... gotta be closedelcowizzid wrote:i have plenty of 19lb v6 injectors here
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: lost in space
I might have 4 x 24lb bluetops if you need bigger
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: lost in space
OK, ... ta
Re: lost in space
Hi chaps, .... can anyone help out with a wiring loom from the '''''' 808 ecu to the engine bay
How many wires are required to run this system, might be easier to make my own loom. Is the plastic multi pin plug available as a part ?
How many wires are required to run this system, might be easier to make my own loom. Is the plastic multi pin plug available as a part ?