SP3 to 12P conversions (done, hopefully)

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

SP3 to 12P conversions (done, hopefully)

Post by MAGP »

Here's a list of what stock SP3 tunes I have. Over time I will either convert them to 12P or match them up to 12P tunes that already exist. Once converted or matched I will link to the 12P file.

EDIT: I have modified the conversion file so page 1 is VE and page 2 is Main Spark Advance. I also renamed the conversion sheet so people don't think it is just for VE.

SP3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 12P
AFUA.N03 $5D V8 Manual
AFUA sp3 to ose 12p.xls
(45.5 KiB) Downloaded 420 times
AMXX.N03 $5D JE Camira Auto
AMXX sp3 to ose 12p.xls
(46 KiB) Downloaded 401 times
ATJN.N03 $5D V8 HSV SV89
ATJN sp3 to ose 12p.xls
(45.5 KiB) Downloaded 418 times
AWMP.N03 $5D V8 Auto Surge Fix
AWMP sp3 to ose 12p.xls
(45.5 KiB) Downloaded 398 times
AWZB.N06 $DB HSV 5000i
AWZB sp3 to ose 12p.xls
(46 KiB) Downloaded 418 times
BAAM.N03 $FB VP V6 Auto
BAAM sp3 to ose 12p.xls
(45.5 KiB) Downloaded 434 times
Last edited by MAGP on Sun Jul 03, 2016 2:42 pm, edited 4 times in total.
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: SP3 to 12P conversions (work in progress)

Post by MAGP »

Here's the rest
BAAN.N03 $FB VP V6 Manual
BAAN sp3 to ose 12p.xls
(45.5 KiB) Downloaded 396 times
BAAP.N03 $FB VP V8 Auto
BAAP sp3 to ose 12p.xls
(45.5 KiB) Downloaded 419 times
BAYA.N03 $DB VN Group A (idle fix)
BAYA sp3 to ose 12p.xls
(46 KiB) Downloaded 399 times
BBMP.N03 $FB VP V8 Police and HSV (185 kw?)
BBMP sp3 to ose 12p.xls
(45.5 KiB) Downloaded 400 times
BBPA.N03 $FB VP V8 Manual
BBPA sp3 to ose 12p.xls
(45.5 KiB) Downloaded 402 times
BDJH.N03 $DB VP HSV Clubsport (200kw)
BDJH sp3 to ose 12p.xls
(46 KiB) Downloaded 426 times
Last edited by MAGP on Sun Jul 03, 2016 2:40 pm, edited 2 times in total.
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: SP3 to 12P conversions (work in progress)

Post by Dylan »

Good work great way to learn. There will be more differences than just ve and spark although they are the major one's. BAYA has loads of changes I know that tune quite well.
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: SP3 to 12P conversions (work in progress)

Post by MAGP »

I appreciate the encouragement. I enjoy this type of thing and I learn by doing instead of sitting back and watching. So if there is something I want to learn I'll ask a couple of questions and then give it a go. Truth be told I'm itching to use this on my own car because it is the tune that is already on it but with 12P having more resolution I should be able to smooth out the power delivery.

BAYA is the VN Group A tune and it is very different to other VN-VP tunes even in Kalmaker. Unless the vehicle has a manifold that can use BAYA I'd never use it as my starting tune. The tune I usually start with the BDJH simply because the VP Clubsport engine is basically just a blueprinted stocker with a really good tune (and a knock sensor).
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: SP3 to 12P conversions (work in progress)

Post by Dylan »

The VE is suited to there cam and intake as said. But have a look at the charge temp and also the coolant contribution table too due to the intake. Also the AE settings even the TPS threshold for AE is different. If needed you could view all these tunes in tuner pro with the appropriate XDF files like $5D and $A6.
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: SP3 to 12P conversions (work in progress)

Post by MAGP »

All updated, please check them out and let me know if there are any errors.
The base excel sheet is attached here.
sp3 to ose 12p.xls
(33 KiB) Downloaded 435 times
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: SP3 to 12P conversions (done, hopefully)

Post by antus »

Top work :thumbup:

I'll add a link to this thread to the FAQ.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
SoullessShadow
Posts: 48
Joined: Fri Jan 11, 2019 4:15 pm
cars: Ba Futura Wagon - Been turboed since 2009
3 x Celica GT4s 1 is a Group A
ST141 Corona - 3sgte swap is planned
EP71 Toyota Starlet Turbo S
A few e36 BMW's
Location: Victoria

Re: SP3 to 12P conversions (done, hopefully)

Post by SoullessShadow »

Hey,

Im using the spread sheet to make a VE and spark table from a stock .bin (ATFY in this case) into a 12p .bin the spreadsheet seems to work fine but I cannot seem to get the table from .xls into the tunerpro table which is annoying me. Also the VE part of the spreadsheet doesnt seem to be work either the Spark table populates the cells in the 12p table but the VE one does not am i missing something
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: SP3 to 12P conversions (done, hopefully)

Post by antus »

Normally you'd select all the cells in the table in excel, then hit ctrl+c to copy and select the top left cell in tunerpro and hit ctrl+v to paste.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
SoullessShadow
Posts: 48
Joined: Fri Jan 11, 2019 4:15 pm
cars: Ba Futura Wagon - Been turboed since 2009
3 x Celica GT4s 1 is a Group A
ST141 Corona - 3sgte swap is planned
EP71 Toyota Starlet Turbo S
A few e36 BMW's
Location: Victoria

Re: SP3 to 12P conversions (done, hopefully)

Post by SoullessShadow »

Yeah that's as easy as I thought it should be. But it wasn't having it at all. I could do that to copy past 1 cell but as soon as I tried more then one it wouldn't work. I mucked around for ages trying to make it work. I ended up manually doing and then interpolating the cells that wernt filled with the different axis between stock and 12p. Hopefully I did it right
Post Reply