vz v6 e55 ecm vats reset
Re: vz v6 e55 ecm vats reset
I have replace the barrel pins in many connectors on these, doesn't seem to be all the issues.
Im sure the heat cycling is not great for the circuit boards and components...
Im sure the heat cycling is not great for the circuit boards and components...
According to chemistry, alcohol is a solution...
Re: vz v6 e55 ecm vats reset
Well how handy is the location of them? You got to wonder some times how they think.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: vz v6 e55 ecm vats reset
they think about how easy it is to install it in the factory, that is all
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- Antwon
- Posts: 101
- Joined: Mon Aug 24, 2015 1:14 pm
- cars: vx ss. 80 series daily, vk ls1 (project)
- Location: arcadia vale nsw
Re: vz v6 e55 ecm vats reset
im pretty sure my work has sent one to injectronics before to be setup to link im fairly sure but its still 350 buks or so to get done and they check over the ecm while its there
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: vz v6 e55 ecm vats reset
They probably use one of the bdm tools and do write the whole flash.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Antwon
- Posts: 101
- Joined: Mon Aug 24, 2015 1:14 pm
- cars: vx ss. 80 series daily, vk ls1 (project)
- Location: arcadia vale nsw
Re: vz v6 e55 ecm vats reset
Most likely as they also flash the updates for the first lot of the ve's to stop them flattening the battery at random times.
Re: vz v6 e55 ecm vats reset
Id be impressed if they do. I took a picture of the insides of the VZ V6 ECU's a while ago... it isnt pretty to get in and attack anything.antus wrote:They probably use one of the bdm tools and do write the whole flash.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: vz v6 e55 ecm vats reset
That explains the price. Its not always a rip off.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: vz v6 e55 ecm vats reset
Been thu this many time now it has to be resett in the wreck with correct imob code or can be done on the bench if u know the code ie if u get the code of holden to match the vin u can resett on the bench but then the code they give can be wrong if the ecm has been fitted to a different vehicle it will take the code of the pim then there is no way of knowing what the code is antus which programing tools are u talking about bdm?
Re: vz v6 e55 ecm vats reset
The vin is recorded on the PCM, so wrong code is not likley... I was of the opinion that the BCM has the immobiliser code, the PCM and BCM are linked. How could a PCM be unlinked on the bench without its linked BCM?
According to chemistry, alcohol is a solution...