Programming/Linking new PCM in 2014 Holden Cruze
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Programming/Linking new PCM in 2014 Holden Cruze
Antus was talking about the thread he had linked in his reply.
I bought a clone device called carprog a little while ago that is supposed to change VIN & link/unlink most controllers but I haven't actually tested it with anything yet!
I bought a clone device called carprog a little while ago that is supposed to change VIN & link/unlink most controllers but I haven't actually tested it with anything yet!
Re: Programming/Linking new PCM in 2014 Holden Cruze
Quick chat with my Holden tech mate.
He says call up the Holden dealer, he recons they will still cover it under "good will warranty". Hes seen cars covered up to 130,000-150,000k kms. As its something vital like an ECU, they will more then likely cover that.
This is his words not mine: "If it fucks up, you'll be looking at a new cluster, ECU, BCM, Keys ect. Its happened previously at work which ended in everything being bricked".
He says call up the Holden dealer, he recons they will still cover it under "good will warranty". Hes seen cars covered up to 130,000-150,000k kms. As its something vital like an ECU, they will more then likely cover that.
This is his words not mine: "If it fucks up, you'll be looking at a new cluster, ECU, BCM, Keys ect. Its happened previously at work which ended in everything being bricked".
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Programming/Linking new PCM in 2014 Holden Cruze
If the ecm is in new condition then there will be no unlink and it should be possible with a 2 day $55USD SPS (Service Programming) license from here: https://www.acdelcotds.com/acdelco/action/subscribehome
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Programming/Linking new PCM in 2014 Holden Cruze
that may have been the case before i fucked with it, i dare say they wont want to touch it now for free!Tazzi wrote:Quick chat with my Holden tech mate.
He says call up the Holden dealer, he recons they will still cover it under "good will warranty". Hes seen cars covered up to 130,000-150,000k kms. As its something vital like an ECU, they will more then likely cover that.
This is his words not mine: "If it fucks up, you'll be looking at a new cluster, ECU, BCM, Keys ect. Its happened previously at work which ended in everything being bricked".
also here is the image of the current PCM.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Programming/Linking new PCM in 2014 Holden Cruze
No harm in trying!Holden202T wrote:that may have been the case before i fucked with it, i dare say they wont want to touch it now for free!Tazzi wrote:Quick chat with my Holden tech mate.
He says call up the Holden dealer, he recons they will still cover it under "good will warranty". Hes seen cars covered up to 130,000-150,000k kms. As its something vital like an ECU, they will more then likely cover that.
This is his words not mine: "If it fucks up, you'll be looking at a new cluster, ECU, BCM, Keys ect. Its happened previously at work which ended in everything being bricked".
also here is the image of the current PCM.
If its brand new, techy says it will be much easier. Still a risk as they have had but brand new ECU's are the way to go.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Programming/Linking new PCM in 2014 Holden Cruze
Nothing to loose by trying, tell them your looking at updating depending how this works out, might change there mind as well
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Programming/Linking new PCM in 2014 Holden Cruze
so then i guess the question is, what do i need to do to make it happen ? im just worried that i can't get data out of my car currently so there is an issue with the mdi or something like that ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Programming/Linking new PCM in 2014 Holden Cruze
I dont have MDI nor am I familar with its use, is there software that comes with it to read codes? The pass through we use does nothing but programming, won't talk to the car until the software tells it in the programming procedure..
According to chemistry, alcohol is a solution...
Re: Programming/Linking new PCM in 2014 Holden Cruze
Ahhhh, so using GDS2 yeah? And not able to ready any live data?Holden202T wrote:so then i guess the question is, what do i need to do to make it happen ? im just worried that i can't get data out of my car currently so there is an issue with the mdi or something like that ?
Same deal with the MDI, theres GDS2 (Does of the diagnostics) and SPS for programming.Biggvl wrote:I dont have MDI nor am I familar with its use, is there software that comes with it to read codes? The pass through we use does nothing but programming, won't talk to the car until the software tells it in the programming procedure..
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Programming/Linking new PCM in 2014 Holden Cruze
that might be the problem then, i can get it to click and shows data moving and the dash of the car does stuff like after i use the HPT interface ....
and GDS2 definately works when i select MDI and it detects it, but doesn't work if i use mdi2 or other options.
and GDS2 definately works when i select MDI and it detects it, but doesn't work if i use mdi2 or other options.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread