Iac
Re: Iac
Definitely retracts , does the complete opposite. Might have to look at the loom
Re: Iac
They definitely extend, to the point of self destructing and flying across the shed.
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Iac
they don't destruct. you just lightly place them together and switch the ignition on and it will retract back in. I found this out when testing some on a stand alone loom and ecu, put it in diag mode and the spindle came out.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Iac
I have resurrected a couple, but I don't have time for fiddly stuff. Learn the hard way I do.
Re: Iac
All good now , found 2 rubbed through wires In the loom , had to use a secondhand one as the original was modified to route away from turbo + pipes . Extending now in diag mode , too late too start it so will see how it goes tomorrow.
Cheers for the help
Cheers for the help
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Iac
I was gonna say the wirings not backwards is it ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread