Hey guys total newbie here, been reading over the getting started files for a while and joined recently so i could get active as this is all so new to me.
First question, i have a active twin throttle body hat im running on my vs 355 but it has a differant tps to the standard holden one, now its a 3 pin sensor also, so does this mean i can wire it in to work with the factory ecu?
Ive attached a photo of what type of tps it is hkpefully it works. Look forward to your input thanks guys
Differant tps
Differant tps
- Attachments
-
- downloadfile.jpg (22.23 KiB) Viewed 1369 times
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Differant tps
Theyre nearly all 0-5 volt so should work. Confirm by checking resistance as you open it looking for an analog signal and not a switch type (should be ok) and make sure you install it the right way around.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396