Hi all new here, i have a ecotec v6 conversion in my CJ6 jeep (1974) that was in when i brought it but not conected up. The PCM has BWPJ on it and service no 16199728.
There is one 8 pin plug from PCM which i was told needs to be wired into ignition but i cant find any diagrams that match up with wire colors to pin locations except for ....
Red/black, white/black = data link connector (A3,F14)
Blue = power econmy switch ( F12 )
Pink = ignition ( A4 )
The others are
violet/white on A5
Brown/white on D9
Brown/white on F5
Yellow/black on D7
I cant find out what they are to try and crank it up.
VT PCM wiring
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: VT PCM wiring
The VT wiring thread in the wiring sub section should hold some of your answers .. https://pcmhacking.net/forums/viewto ... =32&t=2265
You will also have to have VATS (ant-theft system) removed from the memcal or get a BCM simulator if you are not running a factory VT BCM and matching key head.
You will also have to have VATS (ant-theft system) removed from the memcal or get a BCM simulator if you are not running a factory VT BCM and matching key head.
-
coastlaw
- Posts: 3
- Joined: Sun Sep 11, 2016 9:27 pm
- cars: 74 CJ6 jeep , 3.8 ecotec
69 VW single cab ute
69 leyland atlantean double decker bus
97 Jeep grand cherokee Ltd
Re: VT PCM wiring
Just found out its actually a 97 VS ute engine from previous owner.
-
delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VT PCM wiring
Bwpj is vs tune
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem