Need to tune my wingless v6,
Factory ecu, just need some advice on what i need to buy and approximate prices,
Any info is muchley appreciated
Vr v6 ecu tuning
Re: Vr v6 ecu tuning
All you really need is a wide band sensor and a USB interface for logging. Run a NVRAM to save on burning any changes but a NVRAM is around the same price as a burner.
What injectors are you running? I tuned one of these for a mate came up a treat good gains to be had.
What injectors are you running? I tuned one of these for a mate came up a treat good gains to be had.
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Vr v6 ecu tuning
Its always worth getting an eeprom burner even with an nvram. Sucks to not be able recover if the contents are corrupted somehow on a track day, though once you have a good tune you might also want to put it on an eeprom in a memcal for long term reliability.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Vr v6 ecu tuning
I too have a stock VR V6 and looking to get into this stuff, so am keen on a what do I need/how-to info on how to get setup, cheers! So many guides and things around here it's hard to know what's what
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Vr v6 ecu tuning
The FAQ is a good place to start ... viewtopic.php?f=7&t=1396
First thing there is the hardware and software guide of what you will need.
First thing there is the hardware and software guide of what you will need.