Holden Xdf's

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
Posts: 5239
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Holden Xdf's

Postby delcowizzid » Sun Mar 01, 2009 10:06 am

Xdf's to suit holden bin files, some are incomplete, some have equations missing or wrong, once again no responsibility taken for damage caused by using these xdf's.

These definitions are for editing the contents of memcals. For logging/scanning while the car is running, get the data stream definitions here: http://www.delcohacking.net/forums/view ... ?f=10&t=29

VL
RB30E(T)_v1.0.xdf
(25.98 KiB) Downloaded 1000 times


VN/VP
$5D XDF.zip
(11.31 KiB) Downloaded 3295 times

2bar_5d_V2.zip
(11.43 KiB) Downloaded 1233 times

FB.zip
(8.82 KiB) Downloaded 1035 times

DB_1227808 xdf.zip
(7.96 KiB) Downloaded 1131 times

b1 XDF.zip
(2.84 KiB) Downloaded 1006 times

$03.zip
$03 = LPG functions (V6 Only)
(8.86 KiB) Downloaded 787 times

$A5_v1.1.zip
v1.1 update (fixed idle spark table)
(13.33 KiB) Downloaded 844 times


VR

Recommended for $11:
$11B_V106.zip
(40.17 KiB) Downloaded 1189 times

More information here: http://delcohacking.net/forums/viewtopic.php?f=7&t=634

16183082 $12 version 2d.zip
(15.19 KiB) Downloaded 1464 times

16183082 $12 version 2b.zip
(14.96 KiB) Downloaded 1037 times

16183082 $12 xdf version 1.zip
(14.97 KiB) Downloaded 1160 times


obsolete, you should not need these, here for historical reasons:
$11 - GM Holden VR Auto Commodore VersionE.zip
(18.47 KiB) Downloaded 1059 times

$11-VR-424.zip
(18.38 KiB) Downloaded 933 times

$11 version 3 xdf.rar
(13.56 KiB) Downloaded 899 times


VS
VS V6 v1.24 $51.xdf
(815.84 KiB) Downloaded 1433 times

VS V6 v1.04 $51F Getrag.xdf
(379.43 KiB) Downloaded 931 times

$83 VS V8 v1.01.xdf
(118.34 KiB) Downloaded 1390 times

$A6 VS V8 Series 3 V1.02.xdf
(150.54 KiB) Downloaded 1028 times

16183082 $5B version 1.zip
(15.29 KiB) Downloaded 1302 times


VS S/C
VS L67 v1.08 $51.xdf
(783.05 KiB) Downloaded 1144 times


VT
VT V8 V1.41 A6C.xdf
(274.52 KiB) Downloaded 1242 times

VT V8 V1.3 $A6E.xdf
(170.27 KiB) Downloaded 987 times

VT V6 V1.1$A5C.xdf
(252.88 KiB) Downloaded 1245 times

VT V6 V1.92 $A5K.xdf
(279.2 KiB) Downloaded 1336 times

VT V6 V1.92 $A5J.xdf
(206.17 KiB) Downloaded 1005 times

VT V6 V1.91 $A5F.xdf
(273.44 KiB) Downloaded 1206 times


VX
VXV6_BD A v1.33.xdf
(210.29 KiB) Downloaded 1363 times

VXV6_BD B v1.33.xdf
(222.61 KiB) Downloaded 1074 times


VY
VY V6_$060A v2.63.xdf
(246.95 KiB) Downloaded 1277 times

VY V6_$060B v2.41.xdf
(229.89 KiB) Downloaded 997 times


VY S/C
VY_L67_V1.95_$07.xdf
(224.84 KiB) Downloaded 1011 times


Kalmaker
N00=SP2
Kalmaker N00 - FB.zip
(11 KiB) Downloaded 575 times

KALMAKER SP3 N05 XDFversion 3.zip
(13.82 KiB) Downloaded 666 times


KALMAKER SP3 N03.zip
(8.38 KiB) Downloaded 608 times

W71.xdf
(73.99 KiB) Downloaded 571 times

W55.xdf
(143.68 KiB) Downloaded 547 times

W51.xdf
(623.62 KiB) Downloaded 580 times

w81.xdf
(81.93 KiB) Downloaded 527 times


XDF Helpers

See MAF Tuning helpers here: viewtopic.php?f=7&t=1396&p=15255#p15255



Archive
$83 version 1 VS 96 5.0 LTR AUTO.zip
(15.48 KiB) Downloaded 1026 times

16199728_ver2.zip
(4.32 KiB) Downloaded 944 times

83A.zip
(3.58 KiB) Downloaded 840 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Site Admin
User avatar
Posts: 6163
Joined: Sat Feb 28, 2009 8:34 pm

Re: Holden Xdf's

Postby antus » Sun Mar 15, 2009 2:26 pm

OTHER XDF INFORMATION & THREADS

$11 XDF and general info.. http://delcohacking.net/forums/viewtopic.php?f=7&t=634

Yoda69's A6 Info and XDF .. http://delcohacking.net/forums/viewtopic.php?f=7&t=315

Yoda69's A5 Info and XDF .. http://delcohacking.net/forums/viewtopic.php?f=7&t=270

VY Thread http://delcohacking.net/forums/viewtopic.php?f=7&t=152

Enhanced factory bins (for more boost, and extra features): viewtopic.php?f=27&t=2518
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 9969
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Holden Xdf's

Postby Holden202T » Tue Apr 13, 2010 9:06 pm

CHANGELOGS


$51 N/A
EDIT: Update to v1.05
Lean Cruise Stuff defined.
MAF Tables and Scalers added.

EDIT: Update to v1.07
Alot of transmission parameters have been added/updated.
Power Enrichment related items have been added.
Few other general bits and pieces added.

EDIT: Added Yoda's Power Enrichment Calculation Spreadsheet.

EDIT: Update to v1.08
Torque converter clutch settings beginning to be added.

EDIT: Update to v1.10
IAC paramaters added.
Few tables tidied up etc.

EDIT: Update to V1.11
Added some cranking fuel Pulse Width tables

EDIT: Update to v1.13
There has been way too much added to list, got to thank The1 for doing most of the work with this as since i sold the ecotec torana i haven't been able to test much etc.

EDIT THE1: Update to v1.14
Fixed a few table Errors and other Minor Stuff also added calibration tables

EDIT THE1: Update to v1.15
Added some DFCO Scalars and Fuel Cut & Decel Tables

EDIT THE1: Update to v1.16
Fixed up Spark Tables, errors

EDIT THE1: Update to v1.17
Parameters Sorted into Categories, Lots of Other tables / Scalars added / Fixed, Tracing setup on main tables.

EDIT VL400: Update to v1.18
Changed the bin size to 20000h instead of 32768 so saved bin is 128k

EDIT THE1: Update to v1.19
Shading added to some tables and tracing, Fixed few errors.

EDIT THE1: Update to v1.20
Idle Learn stuff fixed

EDIT THE1: Update to v1.21
Fixed Coolant Spark Advance table
Fixed TCC Lockup Release tables graph errors
Added injector tables and scalars
Changed XDF naming to match others

EDIT THE1: Update to v1.22
Fixed Auto Line Pressure Tables
Fix minor scalar and table errors

EDIT THE1: Update to v1.23
Minor Update

EDIT THE1: Update to V1.24
Fix Lean Cruise Table
Do colour shading on tables
Other minor fixes

VS V6 L67 $51G&H

Update to v1.00
Changed all Tables/Scalers Etc from N/A to S/C & Also Added Supercharger Tables and Scalers.

Update to v1.01
Added some DFCO Scalars and Fuel Cut & Decel Tables

Update to v1.02
Fixed up Spark Tables, errors

Update to v1.03
Changed the bin size to 20000h instead of 32768 so saved bin is 128k

Update to v1.04
Idle Learn stuff fixed

Update to v1.05
Fixed Spark Tables and Spark Reference Scalar

Update to v1.06
Added injector tables and scalars
Changed XDF naming to match others
Put all items in Categories

Update to v1.07
Added Catalyst Protection Scalars & Table
Added Fuel Pump Speed Control Scalars

Update to v1.08
Fixed Auto Line Pressure Tables
Added More Option Flags
Added Extra MAF Delta Airflow Tables
Fix minor scalar and table errors

VS V6 N/A GETRAG $51F

Update to v1.00
Changed all Tables/Scalers Etc from N/A to Suit Getrag.

Update to v1.01
Added some DFCO Scalars and Fuel Cut & Decel Tables

Update to v1.02
Fixed up Spark Tables, errors

Update to v1.03
Changed the bin size to 20000h instead of 32768 so saved bin is 128k

Update to v1.04
Idle Learn stuff fixed

$A6 VS V8 Series 3

Update to v1.01
Fixed VATS Flag

EDIT The1: Update to v1.02
Fixed Lean Cruise Table

VY S/C $07

Update to v1.92
Added ESC & Canister Purge Tables

Update to v1.93
Added Lean Cruise tables/scalars
Added Supercharger tables/scalars

Update to v1.94
Added Cold Start Tables
Added Fan Scalars
Added Throttle Gain Scalar
Added Acceleration Enrichment Tables
Added Injector vs Battery Voltage Table
Added Force Motor Delta Power Enrichment Table

VT V6 $A5K

EDIT THE1: Update to V1.92
Added Injector Scalars and Tables

VT V6 $A5J

EDIT THE1: Update to V1.92
Added Injector Scalars and Tables

VT V8 $A6C

EDIT THE1: Update to V1.41
Added ESC and Canister Purge

VY V6 $060A

EDIT THE1: Update to v2.3
Added ESC Recovery Tables and Scalars

EDIT THE1: Update to v2.4
Added LPG Spark Tables

EDIT THE1: Update to v2.5
Added DFCO, Engine Braking, Canister Purge

VY V6 $060B

EDIT THE1: Update to v2.3
Added LPG Spark Tables

Return to Holden ALDL ECUs

Who is online

Users browsing this forum: No registered users and 5 guests