VS V8 Auto Tuning
-
- Posts: 10
- Joined: Mon Oct 17, 2016 8:05 pm
VS V8 Auto Tuning
Having an attempt of playing with the tune on my VS V8 auto. I thought I'd start with baby steps and put a stock HSV 185 bin on the memcal by turning off Knock Sensor Diag. (Error 43) and setting Burst Knock Retard Enable Coolant Temp. to max temp as I'm not running a knock sensor or filter board. No matter what I do it wont work. Car will start I suspect on LHM chip and auto is stuck in 2nd gear. I can successfully burn the stock or the stock HSV bin back in obviously with knock fault. Stock bin is BWFU0310 and the HSV bin I'm trying with is the BSAK9272 I'm lost as to whether I'm doing something wrong in Tuner Pro when I'm saving my modified bin. Any help would be appreciated. Thanks in advance
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: VS V8 Auto Tuning
Did you change the checksum to AA?
Re: VS V8 Auto Tuning
Burst knock retard isn't what you want to max out. Can't remember the name off hand sorry.
Look at running 11P anyway copy in the 185 VE and spark tables and go from there. Check the VATS to if you're running that.
Look at running 11P anyway copy in the 185 VE and spark tables and go from there. Check the VATS to if you're running that.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS V8 Auto Tuning
knock coolant enable temp ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 10
- Joined: Mon Oct 17, 2016 8:05 pm
Re: VS V8 Auto Tuning
I think the issues are related to the XDF's I've tried. The XDF from the memcal id tool wont allow me to change the checksum to AA and comes up with an unusual program id as $131. If I use a different XDF then it comes up as $83 and allows me to change it to AA and has given me some success. Only one of the XDF's lists KESCOOLA: ESC params - Coolant temp enable. I'll keep trying
Re: VS V8 Auto Tuning
Go 11P 100% correct XDF quality BIN and ADX. Can't go wrong.
-
- Posts: 10
- Joined: Mon Oct 17, 2016 8:05 pm
Re: VS V8 Auto Tuning
Ok so definite issue was with AA checksum and XDF's. I used one XDF to change the checksum and the other to make the knock sensor changes and it seems to have worked. I'll definitely look at 11P