clearing srs airbag light in vs

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
barnsie46
Posts: 26
Joined: Tue Apr 21, 2009 2:54 am
cars: vn ss manual 300kw, vq stato 5l
Vs s3 ss manual , vx ss manual and a few more
Location: kadina south australia

clearing srs airbag light in vs

Post by barnsie46 »

ive been looking at trying to clear the airbag light in my vs ive made an patch cable up to swap pin 9 with pin 1 of the obd plug because srs is pin one 1, im led to belive the code i need to send is F2,56,A,AE im just wondering how i should send the code do do it though tuner pro or is there some other software to send it?
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: clearing srs airbag light in vs

Post by Dylan »

Have a look at OSE Flash Tool download from here.
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: clearing srs airbag light in vs

Post by MAGP »

Read this thread viewtopic.php?f=13&t=5148
barnsie46
Posts: 26
Joined: Tue Apr 21, 2009 2:54 am
cars: vn ss manual 300kw, vq stato 5l
Vs s3 ss manual , vx ss manual and a few more
Location: kadina south australia

Re: clearing srs airbag light in vs

Post by barnsie46 »

Dylan wrote:Have a look at OSE Flash Tool download from here.
ive got OSE enhanced Flash tool how do i enter the code F2,56,A,AE and send?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: clearing srs airbag light in vs

Post by The1 »

you will need a Tech1 or similar tool, no other way known atm. A standard ALDL cable will not work as the SRS data is on a different pin. VT and up are on the same data bus can you can clear codes with ALDL Cable.
barnsie46
Posts: 26
Joined: Tue Apr 21, 2009 2:54 am
cars: vn ss manual 300kw, vq stato 5l
Vs s3 ss manual , vx ss manual and a few more
Location: kadina south australia

Re: clearing srs airbag light in vs

Post by barnsie46 »

The1 wrote:you will need a Tech1 or similar tool, no other way known atm. A standard ALDL cable will not work as the SRS data is on a different pin. VT and up are on the same data bus can you can clear codes with ALDL Cable.

what about if i made a patch cable for my usb cord pin 9 to pin 1 in car would the code still work?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: clearing srs airbag light in vs

Post by The1 »

i have tried that with no luck, also tried monitoring what commands a tech1 sends but it wasn't aldl when i tried, tazzi was attempting to also try and nut it out.
barnsie46
Posts: 26
Joined: Tue Apr 21, 2009 2:54 am
cars: vn ss manual 300kw, vq stato 5l
Vs s3 ss manual , vx ss manual and a few more
Location: kadina south australia

Re: clearing srs airbag light in vs

Post by barnsie46 »

ok do you know the best scan tool that clears these codes cause tech1's are very hard to find these days?
MAGP
Posts: 665
Joined: Tue May 10, 2016 5:48 pm
cars: VC V8 sedan, VS V6 wagon, VT V8 Landcruiser.

Re: clearing srs airbag light in vs

Post by MAGP »

barnsie46 wrote:ok do you know the best scan tool that clears these codes cause tech1's are very hard to find these days?
Did you read the thread I linked to? There are suggestions in that.
barnsie46
Posts: 26
Joined: Tue Apr 21, 2009 2:54 am
cars: vn ss manual 300kw, vq stato 5l
Vs s3 ss manual , vx ss manual and a few more
Location: kadina south australia

Re: clearing srs airbag light in vs

Post by barnsie46 »

MAGP wrote:
barnsie46 wrote:ok do you know the best scan tool that clears these codes cause tech1's are very hard to find these days?
Did you read the thread I linked to? There are suggestions in that.
yeah i have thankyou ive just ordered a vpecker off ebay ill see how that goes.
Post Reply