VR V6 Not starting

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

delcowizzid wrote:Sounds like vats is not disabling or ecu has no power you will get spark and injector power even without the ecu plugged in .if you are getting check engine light on ignition ecu is at least powered up

PCM seems to have power as I got bin file via OSE flashtool and usb aldl.

I didn't think VR had VATS?
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: VR V6 Not starting

Post by kojab »

Vr does have Vats
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

It's a kalmaker w21 $11 bin file & I dont have xdf to tell if vats is on or off?
Would anyone have w21.xdf available?
vs ss
Posts: 591
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: VR V6 Not starting

Post by vs ss »

If the battery has been disconnect you must leave the key on with reds for approx a minute so the kalmaker security will pass, but Once done once the car will operate as normal.
Have you done this ?as it catches a lot of people out.
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

vs ss wrote:If the battery has been disconnect you must leave the key on with reds for approx a minute so the kalmaker security will pass, but Once done once the car will operate as normal.
Have you done this ?as it catches a lot of people out.
Just checked this as well, left for 3-4 mins and still no start.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: VR V6 Not starting

Post by kojab »

L67PSI wrote:It's a kalmaker w21 $11 bin file & I dont have xdf to tell if vats is on or off?
Would anyone have w21.xdf available?
Post up your bin and I will tell you if the Vats is on or off.
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

kojab wrote:
L67PSI wrote:It's a kalmaker w21 $11 bin file & I dont have xdf to tell if vats is on or off?
Would anyone have w21.xdf available?
Post up your bin and I will tell you if the Vats is on or off.
Attached .bin file
Last edited by L67PSI on Tue May 23, 2017 11:22 am, edited 1 time in total.
kojab
Posts: 440
Joined: Sun Mar 22, 2009 11:52 am
cars: VT V6 supercharged in a corolla
Location: Sydney
Contact:

Re: VR V6 Not starting

Post by kojab »

Vats is Disabled in "bin from vrv6.bin"
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

kojab wrote:Vats is Disabled in "bin from vrv6.bin"
Excellent, thanks for taking the time to check. :thumbup:
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: VR V6 Not starting

Post by L67PSI »

Some progress. Now have the noid light flashing, but no start.
Post Reply