Car won't start

Dylan · Post by **Dylan** » Tue Oct 17, 2017 8:58 pm

Are you wanting this tune to be open loop?

nutbag355 · Post by **nutbag355** » Tue Oct 17, 2017 9:03 pm

i had it in open loop while on the dyno, ive since turned open loop off. burnt the memcal and put it in the car. that tune is how it looks on the memcal, not while it was on the dyno.

the log however is from one of the last pulls i did on the dyno.

Dylan · Post by **Dylan** » Tue Oct 17, 2017 9:08 pm

I've never done any boost tunes. I cant see where that richer target is coming from. Hopefully someone else can have a look.
There's a few funny BLM changes done but wouldn't of thought they'd effect target AFR under boost.

Whats with the low spot in the 20-100kpa VE table? So long as that's what it wants its all good.

What intake are you running?

nutbag355 · Post by **nutbag355** » Tue Oct 17, 2017 9:18 pm

its got me buggered as well as ive said, ive gone through the ae tables, closed loop tables... pretty much every table that i would have thought would have an influence and i cant find the reason for it..

which low spot are you talking about? due to it being a valley mount charger the off boost ve doesnt see alot of action about 1800rpm

Post by **delcowizzid** » Tue Oct 17, 2017 10:07 pm

i just played back that log final1 commanding 12.5 on my end in the monitor veiew never any richer

nutbag355 · Post by **nutbag355** » Tue Oct 17, 2017 10:14 pm

This is a screen shot.

What version adx did you use?

Post by **delcowizzid** » Tue Oct 17, 2017 10:51 pm

m,y bad was looking at another log LOL.few flags need changed
econ set=enable airfuel ratio check for closed loop fuel is not set but is on power mode
and both power/economy update baro during run you want turned off with boost
power mode is set to 1 bar economy is 2 bar
theres some big holes in the off boost ve map that need fixed

nutbag355 · Post by **nutbag355** » Wed Oct 18, 2017 5:12 am

Aaaah the old "wrong log file" that'll get ya every time lol

Cheers for having a look mate, I'll change those flags. The map not being selected for power was a woopsy on my part. Good pickup lol.

Yeah there are some low spots in the off boost ve due to it not seeing those cells (got lazy and didn't smooth them out). Will spend some time tonight and pretty it up.

Post by **VL400** » Wed Oct 18, 2017 4:31 pm

Are you absolutely sure its the same bin? Ran it on the bench and its 12.5 which matches the bin.

Also to add to what delcowizzid noticed, make sure the 100kPa columns of boost and non-boost tables are the same.

nutbag355 · Post by **nutbag355** » Wed Oct 18, 2017 7:35 pm

same bin different log, same trace for target afr

today4.xdl: (26.22 KiB) Downloaded 200 times

Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start

Re: Car won't start