Car won't start

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Car won't start

Post by VL400 »

Can you do a get cal with the flashtool from the memcal?

The bin you posted above is 128kb, so two banks of 11p with differences between tunes on each bank. Wondering if the memcal has the wrong/other/different bank of the nvram written.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Car won't start

Post by nutbag355 »

Oh that's a good point. I didn't even consider that. Can't do a get cal till tomorrow but would it be worth unstacking, save the tune I want and re stacking that tune? Or is it not that simple?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Car won't start

Post by delcowizzid »

You don't want it stacked when burning to a Vr auto memcal
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Car won't start

Post by Holden202T »

best bet if you want to put it onto a normal memcal is to do a get bin from the nvram after you've finished tuning.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Car won't start

Post by nutbag355 »

Ok so let's clear some stuff up.

For vr auto I don't stack the bin when loading it onto the memcal?

To transfer tune from nvram to memcal I:
1. complete the tune on my pcm fitted with the nvram
2. While still connected to the vehicle I extract the tune using the flash tool?
3. I then save that file and that's the file I burn to the memcal?
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: Car won't start

Post by Dylan »

Correct, with flash tool do a "Get BIN" not get cal.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Car won't start

Post by nutbag355 »

Awesome. Thanks mate.
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Car won't start

Post by nutbag355 »

Can anyone confirm if this is a 808? It has no obvious makings or stickers
IMG_3987.JPG
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: Car won't start

Post by delcowizzid »

Looks to be
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
nutbag355
Posts: 130
Joined: Tue Nov 29, 2016 2:59 pm
cars: bf xr6 turbo
vs ss
vr clubsport
Location: Rockhampton

Re: Car won't start

Post by nutbag355 »

IMG_3989.JPG
Eeeeeexcellent, looks like I'll be buying a Comms port then.
Next project
Post Reply