Car won't start
Re: Car won't start
Are you wanting this tune to be open loop?
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
i had it in open loop while on the dyno, ive since turned open loop off. burnt the memcal and put it in the car. that tune is how it looks on the memcal, not while it was on the dyno.
the log however is from one of the last pulls i did on the dyno.
the log however is from one of the last pulls i did on the dyno.
Re: Car won't start
I've never done any boost tunes. I cant see where that richer target is coming from. Hopefully someone else can have a look.
There's a few funny BLM changes done but wouldn't of thought they'd effect target AFR under boost.
Whats with the low spot in the 20-100kpa VE table? So long as that's what it wants its all good.
What intake are you running?
There's a few funny BLM changes done but wouldn't of thought they'd effect target AFR under boost.
Whats with the low spot in the 20-100kpa VE table? So long as that's what it wants its all good.
What intake are you running?
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
its got me buggered as well as ive said, ive gone through the ae tables, closed loop tables... pretty much every table that i would have thought would have an influence and i cant find the reason for it..
which low spot are you talking about? due to it being a valley mount charger the off boost ve doesnt see alot of action about 1800rpm
which low spot are you talking about? due to it being a valley mount charger the off boost ve doesnt see alot of action about 1800rpm
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
i just played back that log final1 commanding 12.5 on my end in the monitor veiew never any richer
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
What version adx did you use?
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Car won't start
m,y bad was looking at another log LOL.few flags need changed
econ set=enable airfuel ratio check for closed loop fuel is not set but is on power mode
and both power/economy update baro during run you want turned off with boost
power mode is set to 1 bar economy is 2 bar
theres some big holes in the off boost ve map that need fixed
econ set=enable airfuel ratio check for closed loop fuel is not set but is on power mode
and both power/economy update baro during run you want turned off with boost
power mode is set to 1 bar economy is 2 bar
theres some big holes in the off boost ve map that need fixed
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
Aaaah the old "wrong log file" that'll get ya every time lol
Cheers for having a look mate, I'll change those flags. The map not being selected for power was a woopsy on my part. Good pickup lol.
Yeah there are some low spots in the off boost ve due to it not seeing those cells (got lazy and didn't smooth them out). Will spend some time tonight and pretty it up.
Cheers for having a look mate, I'll change those flags. The map not being selected for power was a woopsy on my part. Good pickup lol.
Yeah there are some low spots in the off boost ve due to it not seeing those cells (got lazy and didn't smooth them out). Will spend some time tonight and pretty it up.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Car won't start
Are you absolutely sure its the same bin? Ran it on the bench and its 12.5 which matches the bin.
Also to add to what delcowizzid noticed, make sure the 100kPa columns of boost and non-boost tables are the same.
Also to add to what delcowizzid noticed, make sure the 100kPa columns of boost and non-boost tables are the same.
-
- Posts: 130
- Joined: Tue Nov 29, 2016 2:59 pm
- cars: bf xr6 turbo
vs ss
vr clubsport - Location: Rockhampton
Re: Car won't start
same bin different log, same trace for target afr